Slave cylinder?

[Tarik76]

My clutch went to the floor while driving and I had to pull it back up. When parked noticed brake fluid leaking onto the ground. Put it up on a lift and brake fluid is leaking out the trans. Sounds like I need to replace the slave cylinder??

Sponsored

 

[Cobra Jet]

If you have not already and before testing into it - check the line going to the slave - reference this thread:

https://www.mustang6g.com/forums/threads/urgent-check-clutch-line-at-brake-master-cylinder.84132/

 

[Tarik76]

If you have not already and before testing into it - check the line going to the slave - reference this thread:

https://www.mustang6g.com/forums/threads/urgent-check-clutch-line-at-brake-master-cylinder.84132/

Yea that was the first thing I did. The fluid was leaking into the trans out of the holes in the bottom of the housing. So I thought it was the slave cylinder. But I actually think it was the plastic elbow from the clutch line that goes into the side of the trans had cracked. I pulled the trans to be safe.

 

[Jhalil101]

I know this is an old post but do you have a part number for that elbow?

Sponsored