Signature Wheel’s GT500 Adventures

[kilobravo]

Roger that, Tom but I doubt T wants any extra expenses at the moment.

Got the alpo rag today and of course the cover was about the virus. Haven't read any of it yet though but I HOPE they're doing a good job under the circumstances.

 

[scottgt500]

My signature wheels should arrive late next week. I opted out of the $400 titanium lugs but was wondering what is the “go to” brand for aftermarket lugs? I was told oem will be fine but they might stick out due to different wheel offset. Thanks in advance!

Scott

 

[Jmeo]

My signature wheels should arrive late next week. I opted out of the $400 titanium lugs but was wondering what is the “go to” brand for aftermarket lugs? I was told oem will be fine but they might stick out due to different wheel offset. Thanks in advance!

Scott

What wheel did you go with?

 

[scottgt500]

What wheel did you go with?

super excited! Should look excellent on white...

 

[kilobravo]

Tom: These are the wheels Jeff picked up, (SV902's I believe and, I finally found the post but sure wish I could figure out how to link one directly.)

Here's one of his photos...I think they have a lot of the same pizzazz as the OEM CF's (minus one.)

​

 

[Jmeo]

super excited! Should look excellent on white...

Oh yah they will

I like the white center caps as well.

 

[marklboris]

Tom: These are the wheels Jeff picked up, (SV902's I believe and, I finally found the post but sure wish I could figure out how to link one directly.)

Here's one of his photos...I think they have a lot of the same pizzazz as the OEM CF's (minus one.)

​

^^^ Those are SV703's

These are SV902's

 

[50 Deep]

super excited! Should look excellent on white...

Dude, that is going to be KILLER! I cant wait.

^^^ Those are SV703's

These are SV902's

I just cried a little bit.....sooooooooooo damn beautiful. Did you get all the work done? Is that the OEM parking lights?

 

[marklboris]

Thanks and yes I just finished up installing the JL sub and the front parking camera. None of my lights are OEM. I changed out the headlights, taillights, parking lights and side marker lights. These are the first photos I took of the SV902's. Tomorrow I might take it outside and take a few more.

I am PATIENTLY waiting for those black titanium lug nuts........

 

[50 Deep]

Which

Thanks and yes I just finished up installing the JL sub and the front parking camera. None of my lights are OEM. I changed out the headlights, taillights, parking lights and side marker lights. These are the first photos I took of the SV902's. Tomorrow I might take it outside and take a few more.

I am PATIENTLY waiting for those black titanium lug nuts........

did you run with the Opt7? I have them on the GT350 but didn’t know if they would fit the 500

 

[marklboris]

No, they are Morimoto full LED projection headlights and LED parking/sequential turn signals

 

[scottgt500]

Dude, that is going to be KILLER! I cant wait.

What was the brand for lug nuts that recommend? I passed on the titanium ones...just want to be prepared if I don’t like the oem fitment...you said oem may stick out.

Scott

 

[kilobravo]

Mark: Which model headlights and parking lights and what dealer did you use for Morimoto?

 

[marklboris]

Funny, Terrance just texted me the same question. I should point out, while the headlights fit perfectly (plug and play) the parking/sequential turn signal lights did not. I had to cut the plastic bracket behind those lights to make them fit as the Morimoto's are deeper. So while it does not look pretty behind the parking light, it mounts and fits in the bumper perfectly. If I like something, I am going to make it fit one way or another.

https://www.americanmuscle.com/morimoto-xb-led-head-lights-1517-1819-gt350.html
https://www.americanmuscle.com/morimoto-smoked-xb-sequential-led-turn-signals-1517.html

The upper large hole is where the headlight goes. The lower small hole is for the parking light.
The zig-zag looking bracket behind the small hole I had to cut up to get the rear of the Morimoto parking
light to fit. The three mounting screws still fit the light though.

 

[kilobravo]

I guess his ears were burning, or mine were. :-) Anyway, many thanks for the info and links, Mark.

And what model did you choose for the tail lights?