"Show Gauges" not working digital cluster

[FLmanScott]

I have a 21 Mach 1 with the digital gauge cluster. In the settings there is an option to "Show Gauges" so you can see additional data. I was working on the driver's seat and disconnected the power. After reconnecting the "Show Gauges" option just gives me a blank screen (between the tach and speedo, not the whole screen). I'd like to have these for my upcoming track weekend. Any suggestions on what to check?

Sponsored

 

[David Schmidt]

Pony->Gauges->Configure MyGauges - lets you set up what the blank screen should be filled with.

 

[P2]

^^What he said...^^

 

[FLmanScott]

Pony->Gauges->Configure MyGauges - lets you set up what the blank screen should be filled with.

Yup, realized what I was doing after I had some coffee. Disconnecting the battery reset my selections for which gauges to show. Rechecked the boxes. Poof. Like magic. Thanks for the reply.

 

[GTP]

I display trans temp, CHT, and axle temp for track days.

If your CHT needle points straight up at 12:00, you might wrongly think that your A10 is acting up.

 

[Zooks527]

There's also swapping in the GT350 Oil Temperature gauge to consider.

Sponsored