StangTime
Well-Known Member
- Joined
- Apr 16, 2019
- Threads
- 77
- Messages
- 3,510
- Reaction score
- 3,934
- Location
- Ontario 🇨🇦
- First Name
- Todd
- Vehicle(s)
- 19' GT PP1 Manual
There is a clip that snaps over the fender lip. You can see it in action here:I bought the ZL1 Addon versions as I was real happy with the ones I put on my 2016.
Well, the new ZL1's are made from thicker plastic and the adhesive tape let go of both the front flaps within a couple of weeks (vs. adhesive still holding on the thinner ones on my 2016 after 5 years and over 100k miles of driving). I blame the thicker and stiffer plastic (which does make them "nicer"), or the flaps were not cleaned properly before applying the tape (it let go there rather than the fender). I had them send me new tape, but I've yet to replace it yet as it is still holding at the top of both flaps (even after 13+k miles and some nasty winter driving this season). I'll admit I got lazy, but I was also curious to see how the rest of the adhesive would hold up through the winter.
Just checked out Rokblox web site and I see that they DO NOT use adhesive tape, instead they have some sort of fastener at the top that they claim is "no-drill". I wanted to see the installation instructions so I could hopefully see how it is fastened, but they don't post them on the site. Anyone care to share the install instructions and/or pics of the special fastener used ??
Thanks,
Doug
Pics of the adhesive failure on my ZL1's:
Sponsored