Project6gr wait times?

[Ant]

wait time depends on if they have current inventory on hand or not. you can always check with us up front

yep that’s what I did. Got mine through you guys and got a better deal

Sponsored

 

[snake bite]

So unfortunately the OEM center caps didn’t fit the front either. I ended up having to use the ones that 6GR supplied. Wonder if it’s due to my offset? I did 20x10 all around and believe that has a +35 offset.

I had the same issue with the fronts not fitting. It's basically the tabs are too long. I just dremeled them down a bit till the fit.

 

[JLTH2183]

So unfortunately the OEM center caps didn’t fit the front either. I ended up having to use the ones that 6GR supplied. Wonder if it’s due to my offset? I did 20x10 all around and believe that has a +35 offset.

I did 19x10 up front and 19x11 at the rear

 

[Ballistica]

Not sure what the issue is but I'm unable to get the aftermarket or the OEM center caps to fit the front. The aftermarket ones seem to be too long and I did Dremel them down a bit but still couldn't get them on. The OEM ones have tabs in the rear of them where the silver pony attaches. Those were hitting the center of the front hubs, so no go there either. Ended up putting on the 6GR ones and they fit fine. Not the biggest fan of these ones but we'll see if they grow on me. Thanks for all the help and suggestions!

 

[GD~]

Not sure what the issue is but I'm unable to get the aftermarket or the OEM center caps to fit the front. The aftermarket ones seem to be too long and I did Dremel them down a bit but still couldn't get them on. The OEM ones have tabs in the rear of them where the silver pony attaches. Those were hitting the center of the front hubs, so no go there either. Ended up putting on the 6GR ones and they fit fine. Not the biggest fan of these ones but we'll see if they grow on me. Thanks for all the help and suggestions!

Are you trying to install the center caps while the wheel is mounted on the car? If so, remove wheel and give it another shot. Mine wouldn't go on unless the wheel was off the car.

 

[snake bite]

Are you trying to install the center caps while the wheel is mounted on the car? If so, remove wheel and give it another shot. Mine wouldn't go on unless the wheel was off the car.

Yeah good point, i forgot that bit 1. I dremeled and fitted on the rims before I put then on the car.

 

[Ballistica]

Are you trying to install the center caps while the wheel is mounted on the car? If so, remove wheel and give it another shot. Mine wouldn't go on unless the wheel was off the car.

I did try to install them while the wheels were mounted. Honestly didn’t think about installing them with the wheels off. I’ll give that a try! Thank you!

 

[GD~]

I put on some satin black ford caps from levit town ford and had to install them with the front wheel off. I should've told you sooner that I hadn't tried installing the mustang emblem caps from the OEM wheels. Soooo, I cannot say that those will for sure work. But I didn't see any differences between the oem caps and the ones from levit town fwiw.

 

[Ballistica]

I put on some satin black ford caps from levit town ford and had to install them with the front wheel off. I should've told you sooner that I hadn't tried installing the mustang emblem caps from the OEM wheels. Soooo, I cannot say that those will for sure work. But I didn't see any differences between the oem caps and the ones from levit town fwiw.

I appreciate the help. I’ll see about installing the OEM caps with the wheels off and hopefully they’ll work. I’ve had the 6GR ones on for a while and they’re still not really growing on me.

 

[ninjacoupe]

Finally got them mounted. Honestly the pictures don’t do them Justice. Black rims on a white car tend to disappear in the pictures. They look stunning in person and the brushed black when the sun hits just adds a whole other element

 

[GD~]

Looking sharp. What size and what springs? The stance is excellent!

 

[ninjacoupe]

Looking sharp. What size and what springs? The stance is excellent!

Thanks man!
20x10 Front with 285/35/20
20x11 Rear with 305/35/20 Mickeys

The stance just kind of is. Have BMR drag springs in the back with a couple of steeda spacers to clear my big drag radials and Kelltrac Coilovers up front with zero preload

I think the tire and wheel size/offset combo fits the cars wells so good the ride height isn’t as critical As with other combos

 

[ninjacoupe]

Nice rolling shot my buddy snapped off

 

[GD~]

Having a little fun with the old rear wheels/tires before putting on the new ones.

 

[GD~]

@Ballistica, did you ever get your center caps on?

Sponsored