Boddie
Well-Known Member
- Joined
- Mar 11, 2016
- Threads
- 19
- Messages
- 302
- Reaction score
- 126
- Location
- Redmond WA
- Vehicle(s)
- 2015 Mustang GT Premium PP
- Thread starter
- #1
So got the stage 1 procharger ho complete kit from beefcake and worked with a friend who has a shop all day yesterday getting the kit on. This is a 15 GT with ~20k miles. Went very smoothly all the way up until we tried our first start. Car blips to a bit over 1k RPMs and than stalls. There was a MAF sensor error. Cleared the code and tried again but same thing. No more sensor errors from that point on though. My friend works on a lot of boosted cars and said if it will run with maf unplugged its likely a boost leak. Sure enough we unplugged it and started and idled just fine. We then shut it off and hooked up a smoke tester. We did find some leaks but got those quickly resolved. Go to start it up and same thing. Blips to a bit over 1k and stalls. Emailed Procharger tuning about the issue, but if anyone has had any similar issues and was able to resolve it let me know. This is flustering big time.
Sponsored