PID for Fuel Rail Pressure sensor

[NightmareMoon]

So I want to add a custom PID to a LiveLink configuration file for the GT350's Fuel Rail Sensor, because for reasons. (I have the sensor plugged into the ECU, but its a GT ECU not a GT350, so not sure... it might work)

Anybody have the info I would need to properly watch a PID like that? Address, Data, Bits, formulas...?

Sponsored

 

[WildHorse]

Anybody have the info I would need to properly watch a PID like that? Address, Data, Bits, formulas...?

This may be helpful .
https://derivesystems.helpjuice.com/138635-livelink/348377-livelink-gen-ii

 

[NightmareMoon]

This may be helpful .
https://derivesystems.helpjuice.com/138635-livelink/348377-livelink-gen-ii

Thanks, I’m sort of grasping at straws for a hail mary to get that sensor reporting.

I dont know if live link is rejecting it or if the ECU is blind to it.

Im also not entirely sure what it would show up as in LineLink. I think maybe “frp low kpa” pid, but I need someone to verify.

 

[K4fxd]

Why 2 threads? If you know the pins the GT350 pressure sensor goes to, hook it up then re poll the car and it might show up.

frp low kpa is fuel rail pressure in kpa. There is also a high frp kpa pid

https://www.mustang6g.com/forums/th...a-quick-datalog-question.205867/#post-4118437

Sponsored