Need help for tire/rim setup

[S550greyyy]

I was looking at getting some new rims 19x9.5 with 33mm offset and 275/40/19 tires. I was wondering if anyone has a similar setup to this and if this is a good setup to run. If anyone has a similar setup, a picture would be nice. Thank you

Sponsored

 

[Nickel]

They're wheels, not rims.

I have 19x9.5 performance pack wheels on all 4 corners, with 275/40R19s and 25mm hubcentric spacers, which is almost exactly where yours would sit.

 

[MidwayJ]

That's my setup exactly. 19x9.5 ET33 with 275/40 tires. This is stock ride height but I will be lowering it with BMR minimal drop springs. I would like the look better with wider rear wheels/tires but the square setup handles well and I like being able to rotate tires.

 

[Hi-PO Stang]

What does ET33 mean ? Nice looking wheels. I need a set of those.

 

[MidwayJ]

What does ET33 mean ? Nice looking wheels. I need a set of those.

Thanks. It's another way of saying the wheel offset is +33.

 

[kws6000]

Any tendency to follow grooves on the road
with the large front tires?

 

[MidwayJ]

Any tendency to follow grooves on the road
with the large front tires?

I wondered about tramlining before I got them but it's not an issue at all.

 

[Discount Tire]

I was looking at getting some new rims 19x9.5 with 33mm offset and 275/40/19 tires. I was wondering if anyone has a similar setup to this and if this is a good setup to run. If anyone has a similar setup, a picture would be nice. Thank you

This would be a great fitment. To give you an idea, if you put a tape measure to the outside lip of your stock wheel and measured 1" out, this is where the lip of the new wheel would sit.

As far as handling, any alterations to the wheels and/or tires can effect handling however this is not an extremely aggressive application and should work well. It looks like @MidwayJ has real world experience and was able to confirm.

Sponsored