My Whipple install

[Evo_Rob]

4th and 5th gear

Geez. I would not have guessed such a difference.

Sponsored

 

[Roh92cp]

What was the RPM on the pulls?

 

[nicktechla]

What was the RPM on the pulls?

The shop hasn't sent me the dyno data yet, i'll let you know when I get it.

 

[nicktechla]

Here you go [MENTION=16819]Roh92cp[/MENTION]

 

[jasonstang]

Nice numbers. I am always curious about the black exhaust air pulses. What does it mean?

 

[nicktechla]

Nice numbers. I am always curious about the black exhaust air pulses. What does it mean?

i was wondering about that too. Maybe someone else can comment if thats normal? I looked up a few other dyno videos and it seemed to be 50/50 if they did that or not.

 

[gsxr1300]

Awesome!

Probably would have made 30 more if they revved it higher

 

[Roh92cp]

Yeah the rev limiter is 7500, you went to 6500, peak number would have been 25 more.

 

[Roh92cp]

Nice numbers. I am always curious about the black exhaust air pulses. What does it mean?

Likely fuel rich condition.

 

[Evo_Rob]

[MENTION=18668]nicktechla[/MENTION], what pulley are those runs on?

 

[Obsol3te]

4th and 5th gear

Which one is 4th which one is 5th? I believe 5th gear is our 1:1 in the MT-82

 

[gsxr1300]

if you have 3.31 gears you need to use 4th or you will hit the speed limited
3.73 gearsyou can use 5th 1:1

 

[Obsol3te]

if you have 3.31 gears you need to use 4th or you will hit the speed limited
3.73 gearsyou can use 5th 1:1

So I take it 5th was the higher power figure? 4th would put it at a mechanical advantage so id ASSUME 4th would show a higher dyno number? Or am I thinking about this all wrong

 

[Roh92cp]

So I take it 5th was the higher power figure? 4th would put it at a mechanical advantage so id ASSUME 4th would show a higher dyno number? Or am I thinking about this all wrong

I believe 4th gear will result in lower Dyno numbers.

 

[jasonstang]

Likely fuel rich condition.

Wouldn't it be rich all the time instead of in pulses?

Sponsored