Bulutt
Well-Known Member
Also have a bunch of other Steeda suspensions bits front and back all from Mustang Motorsport. Very happy with them all.Looks fantastic - thank you for sharing
TJ
Sponsored
Also have a bunch of other Steeda suspensions bits front and back all from Mustang Motorsport. Very happy with them all.Looks fantastic - thank you for sharing
TJ
Hey can you post a pic of your car I wanna see how the ride height looks
That is the ford racing kit with the flash. Just right for me.
Are you in Australia or US?Steeda Magneride lowering springs with 1" drop. I don't think it looks lowered, I think it looks the way it should have come from the factory.
Yes Australia and yes both. Not getting spacers as want wider/bigger wheels when need to replace tyres.Are you in Australia or US?
Did you do both front and rear ?
It’s the ride height I was aiming for as well ! Slight rake to the front!
Awesome!!!!
Cheers Bulutt!Yes Australia and yes both. Not getting spacers as want wider/bigger wheels when need to replace tyres.
Are you still running 30s ?Steeda magneride springs and 25mm spacers. No calibration needed.
Yes To caster/camber bits for sufficient adjustmentI'm thinking about adding Steeda's springs for the Magneride. Did ya'll need to add the adjustable caster/camber plate or camber bolts to get the suspension to align correctly or did the OE parts work out ok?
Lee
Any rub issues? Looks like the front would rub in corners.Steeda Magneride lowering springs with 1" drop. I don't think it looks lowered, I think it looks the way it should have come from the factory.
Nothing rubs. All good. No regrets. Hanging out for the new wheels.Any rub issues? Looks like the front would rub in corners.
I know this is an old thread so hopefully I get a response.Here are some photos of what the Bullitt looks like with the Ford Performance kit and Steeda wheel spacers:
For the mustangs with magneride you have to go with 1 inch in the front and 20mm in the rear and you’ll get that square stance and it will all fit perfect no cutting required. That’s the setup I’m running on my bullitt and what steeda recommendsI know this is an old thread so hopefully I get a response.
what size spacers did you use? Did you have to cut the lug nuts to get the wheels to seat?
I had to trim my last mustang with 20mm spacers.