Budnr22
Well-Known Member
- Joined
- Apr 22, 2015
- Threads
- 38
- Messages
- 354
- Reaction score
- 56
- Location
- Northern VA
- Vehicle(s)
- 2016 GT350 - Oxford - Tech Pack
- Thread starter
- #1
SSM 45189 - 2015 Mustang Headlamp Switch Bezel Buzz Or Tick Noise Built On Or Before 4/30/2015
Some 2015 Mustang vehicles may exhibit a buzz or tick noise from the headlamp switch bezel while driving. To address this concern add a 10mm (3/8") x 60mm (2 3/8") piece flocking tape (164-4903) from the Rotunda Squeak and Rattle Kit (164-4900) to the headlamp switch bezel right side edge. Remove the headlamp switch bezel and add the tape to the right side edge folding the tape over the edge at the center of the edge. Refer to Workshop Manual (WSM), section 417-01 Headlamp Switch Removal and Installation for procedure on bezel removal and installation. Use applicable service labor operations in Section 11 of SLTS manual
Some 2015 Mustang vehicles may exhibit a buzz or tick noise from the headlamp switch bezel while driving. To address this concern add a 10mm (3/8") x 60mm (2 3/8") piece flocking tape (164-4903) from the Rotunda Squeak and Rattle Kit (164-4900) to the headlamp switch bezel right side edge. Remove the headlamp switch bezel and add the tape to the right side edge folding the tape over the edge at the center of the edge. Refer to Workshop Manual (WSM), section 417-01 Headlamp Switch Removal and Installation for procedure on bezel removal and installation. Use applicable service labor operations in Section 11 of SLTS manual
Sponsored