Interior LED Kit

[SBLee29]

It seems easier to power through the fuse box. Can this be done with led's in the link u gave us?

Sponsored

 

[tritran18518]

[MENTION=20099]SBLee29[/MENTION] i routed the wires under the trim panel right under the speedometer. and then routed them under the central console.
[MENTION=13249]tritran18518[/MENTION] i had another strip laying around that i used. you can buy individual rolls or strips on amazon i think and then cut them for your desired length. i connected it to the control box via this http://www.amazon.com/gp/product/B00OMKDUB0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
i used two of these since there are 5. so i have room for 3 more strips
[MENTION=9987]Diode Dynamics[/MENTION] Thank you! I already had this led kit laying around with that remote so i just went with that. ill check out some better options though! thanks!

How did you tap the power ?

 

[magnetticmadness]

I used a 12v adapter!


Sent from my iPhone using Tapatalk

 

[magnetticmadness]

Plugged into the arm rest box fuse


Sent from my iPhone using Tapatalk

 

[Midnight_LMR]

Our Footwell kits and RGB strips work perfectly with our Bluetooth/WiFi RGB controllers

Nick C.

Is there any setup of lights that you would advise could do what we are taking about here? Dash and footwells like what he did? Or can DD put a package together for interior lighting kit of some kind? I'm sure it would be a big hit

 

[SBLee29]

My LED's should be here today. Gonna attempt an install this afternoon, once I get home.

 

[magnetticmadness]

[MENTION=20099]SBLee29[/MENTION] goodluck!


Sent from my iPhone using Tapatalk

 

[SBLee29]

I think I blew something, lights were on and then went out. Help =[

UPDATE: Blew the fuse, went to Home Depot and swapped it out. The lights are great. All is well.
[MENTION=19039]magnetticmadness[/MENTION] Do we have to manually turn it off? If so, do you leave it plugged even if the LED's are off?

 

[magnetticmadness]

[MENTION=20099]SBLee29[/MENTION] i use the remote to turn the lights off before i get out because im really an idiot at electrical stuff so i couldnt wire it to like the interior lights that are always on. but yeah turn them off manually all the time but leave it plugged into the 12v power source.

 

[Midnight_LMR]

Wait so these don't fuction like ambient lighting?

 

[magnetticmadness]

they do. i havent wired them so they turn on and off without you doing anything. for now you have to turn it off with the remote until i find away to wire it into the fuse box

 

[Midnight_LMR]

[MENTION=9987]Diode Dynamics[/MENTION] can you guys put a kit together for this? Front and rear footwells as well as dash?

 

[magnetticmadness]

[MENTION=18458]Midnight_LMR[/MENTION] im thinking maybe i can tap into the fuse box with a fuse tap. do you think that would work?

 

[Midnight_LMR]

Or at least figure how long the piece for the dash would be so we can make a DIY kit to accomplish what [MENTION=19039]magnetticmadness[/MENTION] did? I'm not interested in multi-color just single

 

[Midnight_LMR]

[MENTION=19039]magnetticmadness[/MENTION] what I am planning to do is find out where they ran the original ambient kit to, I have the full wiring diagram at home just need to look, and then I will run it to the factory location that way it should turn on and off the same as originally intended. I saw the wiring diagram on here somewhere I think i DIY section

Sponsored