installing the GT350IM

[Mikeiscoo2]

So as the title states ill be installing the GT350IM with stock TB. (but once it gets dialed in i'll also buy the GT350 TB later on.) very soon it has shipped from MMR. im looking for any and all advice from people WHO HAVE installed or helped to install this Intake manifold. i will do a big write up on numbers before and after with dyno sheets and plenty of dyno pulls as its being tuned to compare what it dyno'd with its base tune and with its final tune. and the difference in the before and after between the two IM's. so please any and all advice on the install will be much appreciated. thanks guys. :cheers: also if you have any questions on what ill be doing, or if you want to request to see a comparison of something let me know and ill do it.

Sponsored

 

[Lonmon]

I'm doing this right now also. Looking forward to some specific info about anything needed for making any hose connections, wiring, etc using the stock tb. I have the IM, MMR adapter, 47lb injectors, and Lund tune update ordered. Hoping not to have my car down for more than an afternoon with this install. I believe I have read that some wiring may need to be extended or rerouted to reach.

 

[Mikeiscoo2]

There aren't many people who have done this. It's still very very new. But I expected a little more input than just this. I'll be calling JDM tomorrow for my main questions and when I do the install I'll probably force some unfortunate soul to stay on the line with me while I figure some things out lol. But I imagine it shouldn't be too hard

 

[Schu]

GL... in for updates.

 

[bravohankins]

This thread has my install info, as well as some others....might be helpful.

http://www.mustang6g.com/forums/showthread.php?t=42481&highlight=gt350

 

[Schu]

Ty...

Sponsored