Install PP Gauges on Non-PP Model - Recap

[300mag]

I just installed the pp dash trim with the gauges in a 2018 ecoboost, non premium, i can confirm the plug is behind the radio and the oil pressure gauge does not work. any ideas?

Need custom tune to make oil pressure gauge.

Sponsored

 

[canyon ed]

Before and after. We re installed the PP1 dash W/ GT350 gauges and trim. Came out very nice.

 

[rii_505]

Before and after. We re installed the PP1 dash W/ GT350 gauges and trim. Came out very nice.

Did you had any problem with the air vents? I had a lot of problems with the fitment.

 

[canyon ed]

just some cutting on the center vent

 

[rii_505]

My tuner activated this two parameters but my oil pressure gauge does not work.... any suggestions? BTW i'm cobb tuned.

 

[petah50]

Just installed PP guages in my base 2019 GT. The wiring was there. Plug and play. Oil pressure guage works with no programing needed! Very easy installation!

 

[UNtamed67]

In my case it was a change of setting from "sensor" to "transducer".

 

[texaswrx]

Searched Ebay again and no luck on an oil temp gauge from a gt350.

 

[rii_505]

If anyone is looking for a PP dash trim I’m gonna sell mine this weekend. I don’t want to pay a protuner so I'll go back to stock. I attached some pictures, originally it was aluminum but I wrapped it, it is not perfect but you could remove it. Asking price is $150+shipping OBO.

 

[Jon 5.0 2015GT]

Finally got the tune..all working perfectly!

Nice, Where did you get the tune? And what program was used?

 

[Jon 5.0 2015GT]

If anyone is looking for a PP dash trim I’m gonna sell mine this weekend. I don’t want to pay a protuner so I'll go back to stock. I attached some pictures, originally it was aluminum but I wrapped it, it is not perfect but you could remove it. Asking price is $150+shipping OBO.

Did you sell yet? I’m pretty sure you did so I’m just trying my luck.

 

[Jon 5.0 2015GT]

Hello, I’m looking to buy a dash trim matching set or just the center trim in brushed aluminum for gauge install I’m doing. Anybody have anything please contact me.
Thank you.

 

[Jon 5.0 2015GT]

Hi All,

Just over 2 years ago [MENTION=6944]zackmd1[/MENTION] has a made tutorial showing how to install the PP gauges into standard model...

https://www.mustang6g.com/forums/showthread.php?t=38818


To summarize 30 pages and the status of both gauges after wiring them:

• GT & EB: The oil pressure gauge will work after a tune.
  
  
• V6: The oil pressure gauge will work after a tune BUT the cluster will show "LOW OIL PRESSURE" error

A few days ago I found the solution to overcome the low oil pressure error on my V6....It's a very simple change in the IPC programming, took me a long time to figure it out though lol

I basically changed the as-built data bit in the IPC which controls how the IPC detects the engine oil pressure, there are 2 options - CAN and HW...all the S550s have a default option of CAN, so I simply changed it to HW and now the IPC doesn't know anything about the oil pressure therefore it's not throwing any errors.


The change I made is:
IPC As-built programming
720-02-01: XXXX XXXX X7

Big thanks to Mike from MPT for the tune file!

[ame]

Hello, I’m doing the swap to pp gauges and I have a 2015 Mustang GT Premium. The connector wasn’t in mine so I’m installing that also. I’ve been trying to find out if my oil Pressure gauge will work as keep seeing that I need a tune. I honestly don’t know from where I will be able to get that done. I have the Bama hand held and talked to the Bama tuners and they said they can’t do it. So now I’m scratching my head and wondering if there’s something I can do myself to activate the oils pressure. I have a mechanical gauge already installed so I’m not going nuts on how my oil pressure is but I would like the gauge to work completely. Any help would be great. Thanks.

 

[Jon 5.0 2015GT]

But now, after every engine start, the car has the 'low oil pressure' light come on. I understand well, the pressure information is now used by the gauge and the ECU dummy 'switch' receive a pressure on null.

How can I disable this warning message ?

A possible solution : Turned off DTC P0522 (with HP Tuners) ? (Engine Oil Pressure Sensor/Switch Low Voltage)
thanks for your advices !

I have the same thing happen. Did turning off help? I have a GT premium.

 

[Falk03]

I have the same thing happen. Did turning off help? I have a GT premium.

Is this something you can change in the IPC configuration?

720-02-01 xxxx xxxx x*xx Oil Pressure Switch Input (OPS), One/Two Stage Unlocking (OTSU), Outside Air Temp (OAT), GCC Overspeed Warning (GCC)

Sponsored