Inexpensive drag setup

[SolarFlare]

yes those. most people run those on the 17x9 cobra wheels.

03-04 cobra wheels? They fit ok on s550s? I'm sure it can be done but hesitant to put a big tire on a 17x8 wheel but it appears to be super light.

Sponsored

 

[dev1360]

Check the hoosier website. 28x10 slick is usually rated for an 8" wheel.

 

[GSLSE20B]

03-04 cobra wheels? They fit ok on s550s? I'm sure it can be done but hesitant to put a big tire on a 17x8 wheel but it appears to be super light.

[MENTION=18480]car[/MENTION]los_garcia has run this setup for the last year without issues . The slick is fine on the 17x8 gt wheel .

 

[SolarFlare]

I'm on the lookout for those 99+ GT wheels.

 

[bluebeastsrt]

Do those come with TPMS sensors? If no do you just roll around with a low pressure light?

Yep just deal with the tps light on.

 

[Mikeiscoo2]

many people use 17x9 99-04 cobra wheels

thats what i use.

 

[Xavier]

Is it safe to run bias ply rears with stock fronts?

 

[Mikeg4572]

I do, it's a little weird though.

 

[GSLSE20B]

Is it safe to run bias ply rears with stock fronts?

Run em , keep your foot planted on the accelerator to stay straight . When you lift for the shift it upsets the chassis

 

[Mikeg4572]

Borrowing your bias fronts convinced me. They were nice and car went straight!

 

[SolarFlare]

Found an s550 owner on youtube that runs these. Weight is roughly 19-20. Offset 38 should be ok
http://m.ebay.com/itm/310901806613

 

[elle]

Found an s550 owner on youtube that runs these. Weight is roughly 19-20. Offset 38 should be ok
http://m.ebay.com/itm/310901806613

Stock lug nuts good with that wheel? What is standard offset?

 

[SolarFlare]

Stock lug nuts good with that wheel? What is standard offset?

They have 18, 28 and 38

 

[kcc0521]

I would love to find a set of wheel that also offer a 18" skinny for less than 200 per wheel. I am having a hard time dropping 330 each for racestars.

 

[SolarFlare]

I just want to get something light for the back and I'm good. Just need an answer on whether a 38 offset on a 17x9 will work on our cars.

Sponsored