Header clearance 2019 Mustang

[armani5.0]

Anybody have a solution that works for sure to get the passenger side header away from the ac line? I’ve tried loosening the motor mount bolts and pushing the motor over which gave it a little more room but it’s still making contact and making noise.

Sponsored

 

[LOL WUT]

Some folks have had success placing a small prying tool against the AC line and lightly prying up and to the passenger side. What brand headers are you running?

 

[armani5.0]

Some folks have had success placing a small prying tool against the AC line and lightly prying up and to the passenger side. What brand headers are you running?

I’m running Texas speeds. And you’re saying to pry the ac line to try and push it over?

 

[ZM5.0]

I have Texas speed as well and I had the same issue.. literally loosened both motor mount nuts and got a long pry bar and just shifted the engine over and no problems after.

 

[armani5.0]

I have Texas speed as well and I had the same issue.. literally loosened both motor mount nuts and got a long pry bar and just shifted the engine over and no problems after.

Might have to try that again! So you unloosened the top 2 bolts of the motor mount and just pushed it over correct? Obviously I have to jack the car up and supple the weight of the motor no?

 

[ZM5.0]

Might have to try that again! So you unloosened the top 2 bolts of the motor mount and just pushed it over correct? Obviously I have to jack the car up and supple the weight of the motor no?

Just the top nuts and no since the engine will still be sitting on the mount you’ll be ok

 

[armani5.0]

Just the top nuts and no since the engine will still be sitting on the mount you’ll be ok

I appreciate it, definitely worth a shot.

Sponsored