ForScan question - line level inputs

[tcclindy]

I read the ForScan thread, just trying to confirm these code give a FLAT/LOW level signal I can run to a TwK-88 and/or my amp. Trying to avoid having to buy the Fix-86 to flatten everything out if ForScan can do it for free.

727-01-01 xx5A xxxx xxxx
727-01-02 00xx


Anyone who is using a TwK-88 any input would be appreciated.
Thanks.

Sponsored

 

[tcclindy]

D

I read the ForScan thread, just trying to confirm these code give a FLAT/LOW level signal I can run to a TwK-88 and/or my amp. Trying to avoid having to buy the Fix-86 to flatten everything out if ForScan can do it for free.

727-01-01 xx5A xxxx xxxx
727-01-02 00xx


Anyone who is using a TwK-88 any input would be appreciated.
Thanks.

Does any know if these codes are correct, I am searching in ForScan and cannot find any 727-* codes when I read, I have looked under every module does any one know where to find them. I am running 2015 Mustang GTPP, is it possible that my whipple tune wiped them?

Thoughts?

 

[Cathul]

If your Whipple tune wiped them you would have no radio anymore.
You sure that your OBD adapter is able to handle both MS-CAN and HS-CAN messages?

 

[Hykr3n]

Remember reading somewhere that forscan can't read on tuned car.
Have you tried going back to stock tune to see i you can set you low level output and then re install whipple tune?

 

[SpArKy]

Remember reading somewhere that forscan can't read on tuned car.
Have you tried going back to stock tune to see i you can set you low level output and then re install whipple tune?

nah, forscan can read and write tuned cars no problem.

 

[StangTime]

D


Does any know if these codes are correct, I am searching in ForScan and cannot find any 727-* codes when I read, I have looked under every module does any one know where to find them. I am running 2015 Mustang GTPP, is it possible that my whipple tune wiped them?

Thoughts?

Does your ODB programmer have the MS/HS toggle switch on it? Forscan will ask you to flip the switch to read all the modules. The module with 727- is called the ACM.

 

[tcclindy]

Does your ODB programmer have the MS/HS toggle switch on it? Forscan will ask you to flip the switch to read all the modules. The module with 727- is called the ACM.

Bought an ODBLink MX+ worked like a charm, signal coming through is perfect.

Sponsored