Edelbrock Tech
Well-Known Member
- Thread starter
- #1
Edelbrock is excited to announce the All-New Modular Inlet 2650 TVS Supercharger for 2018-2019 S550 Mustangs!
With an opening of 15.5 square inches, the supercharger inlet is designed for maximum flow to the 2650 TVS rotors. A series of adapters are used to mount different size throttle bodies to the Supercharger.
Stage 1 kits (PNs 15832 & 158320) use the factory air box and factory 80mm throttle body. Stage 1 kits include the Modular 90mm (M-90) adapter that accepts all throttle bodies that use the factory bolt pattern up to a 90mm bore size.
Edelbrock 2018-2019 Mustang Modular Inlet 2650 TVS Supercharger – Stage 1 – 15832
MSRP $6,899
PN 15832 is a complete, 50-State emissions legal (D-215-99) kit that delivers approximately 620whp and 510wtq on 93 pump gas! This kit is eligible for our FREE 3-Year/36,000mi limited powertrain warranty! See warranty details here: https://www.edelbrock.com/warranty
Features:
Real world chassis dyno results of a 2018 GT MT-82 equipped with PN 15832 and Edelbrock 50-State Calibration. Repeatable power every time you step on the gas!
Edelbrock 2018-2019 Mustang Modular Inlet 2650 TVS Supercharger – Stage 1 No Tuner – 158320
MSRP $6,399
PN 158320 is the same as PN 15832 but does not include the SCT BDX Tuner.
Installed Pictures Stage 1 PN 15832
Modular Inlet – Easily upgradable to the upcoming Stage 2 spec. Those who are crafty can fabricate a throttle body adapter and run your throttle body of choice.
What's under the lid? Edelbrock's massive Dual-Pass 3-Core Intercooler! Abraham Lincoln Approves!
Disclaimer: 2015-2017 S550 owners are not forgotten
With an opening of 15.5 square inches, the supercharger inlet is designed for maximum flow to the 2650 TVS rotors. A series of adapters are used to mount different size throttle bodies to the Supercharger.
Stage 1 kits (PNs 15832 & 158320) use the factory air box and factory 80mm throttle body. Stage 1 kits include the Modular 90mm (M-90) adapter that accepts all throttle bodies that use the factory bolt pattern up to a 90mm bore size.
Edelbrock 2018-2019 Mustang Modular Inlet 2650 TVS Supercharger – Stage 1 – 15832
MSRP $6,899
PN 15832 is a complete, 50-State emissions legal (D-215-99) kit that delivers approximately 620whp and 510wtq on 93 pump gas! This kit is eligible for our FREE 3-Year/36,000mi limited powertrain warranty! See warranty details here: https://www.edelbrock.com/warranty
Features:
- All-New Modular Inlet
- Dual Pass 3-Core High Efficiency Air-to-Water Intercooler
- 620whp/510wtq with FREE Powertrain Warranty
- OE Fit and Finish
Real world chassis dyno results of a 2018 GT MT-82 equipped with PN 15832 and Edelbrock 50-State Calibration. Repeatable power every time you step on the gas!
Edelbrock 2018-2019 Mustang Modular Inlet 2650 TVS Supercharger – Stage 1 No Tuner – 158320
MSRP $6,399
PN 158320 is the same as PN 15832 but does not include the SCT BDX Tuner.
Installed Pictures Stage 1 PN 15832
Modular Inlet – Easily upgradable to the upcoming Stage 2 spec. Those who are crafty can fabricate a throttle body adapter and run your throttle body of choice.
What's under the lid? Edelbrock's massive Dual-Pass 3-Core Intercooler! Abraham Lincoln Approves!
Disclaimer: 2015-2017 S550 owners are not forgotten
Sponsored
Last edited: