ECOBOOST guage Not working on Whippled GT 17 PP. ( HELP ) !!

[EviL5.0]

Just installed my Ecoboost guage on my 17 Whipple GT PP that already had oil pressure guage and Vacuum guage in the middle. When i go full throttle my boost stays at Zero.it reads oil and vacuum but not boost. I was told it was plug and play but is not working for me. Also, i contacted my Tuner and he said the tune has nothing to do with this. Any help is appreciate it. Thanks in Advance.

Sponsored

 

[rio16]

Because you were racing too much. LMAO

 

[EviL5.0]

Lol. Not even.!! . It says in running Zero Pounds of Boost !!

 

[rANDIANDI]

If your running 0 Boost shouldnt this be under NA?

 

[3beeps]

If your running 0 Boost shouldn't this be under NA?

:lol::lol::lol:

Where is the gauge reading boost from?

 

[keltymd]

My Ecoboost gauge works fine in my 17GTPP. Plugged right in and works.

 

[Whipple SC]

Just installed my Ecoboost guage on my 17 Whipple GT PP that already had oil pressure guage and Vacuum guage in the middle. When i go full throttle my boost stays at Zero.it reads oil and vacuum but not boost. I was told it was plug and play but is not working for me. Also, i contacted my Tuner and he said the tune has nothing to do with this. Any help is appreciate it. Thanks in Advance.

Our cal or aftermarket cal? It only works with our cal, Ford Racing and Roush based cals.

 

[TripleB]

Mine works on Whipple cal

 

[EviL5.0]

This was suppose to do a plug and play but dont know whats going on. Swapped guages with another buddy of mine anf my guages still Read Zero. I had original oem oil pressure and vacuum before.

 

[EviL5.0]

I have AED tune on my car. I called my Tuner and he said the tune didnt have anything to fo with the guages. Lol he has been really helpful when i had problems ( sarcasm)

 

[SVT-DADDY]

I believe the boost reading still inferred even with the Ecoboost gauge.

I discussed this with Lund and I'll be hooking up a ZT-2 to my Nguage.

 

[Whipple SC]

I have AED tune on my car. I called my Tuner and he said the tune didnt have anything to fo with the guages. Lol he has been really helpful when i had problems ( sarcasm)

Its a calculated gauge, not actual. Have to have our cal to work.

 

[racingmason]

Works on my Sai Li tune. Honestly, its off a bit anyways so I would just install a mechanical gauge.

 

[oesman]

I second installing a mech or sending unit based gauge. AFAIK the ecoboost gauge is nonsense.

Sponsored