Furious18
Well-Known Member
since My cat back is 3” except where it comes to 2.5, I decided to have an exhaust shop weld in a 3” piece across instead of having it bottle down to 2.5”
Sponsored
Ohh I see okay makes much more sense thanks man!since My cat back is 3” except where it comes to 2.5, I decided to have an exhaust shop weld in a 3” piece across instead of having it bottle down to 2.5”
Everything going wel with the headers? I’m so tempted at getting these for $400 and welds look amazing for my 15 gt.
Thanks man, and how was the install? I’ve seen some videos but idk if I should go for it or pay someone to install for meGo ahead and pick them up i installed them for a friend and they fit perfect, they’re better quality than the BBKs I used to have on my car and my friend has put almost 2k miles on them and they look really good only thing is u might have to fab something up to connect the mid pipes to the cat back nothing an extra 30$ can’t fix
It’s not too bad I’ve done all my header installs on jack stands just get a friend to help you out and make sure you have a lot of sockets both deep and normal and some ratcheting wrenches, also for the studs it’s a E11 socket if I remember correctly. Some of the motor mount bolts will need some force to loosen so a breaker bar will help. The driver side is really easy should take you 1 hour the passenger side is space limited so it’s a lot of awkward angles and half turns lol. Like I said it’s not necessarily hard it’s just takes some patience. It took me 2 days the first time I installed headers just cuz I’d get frustrated and take a break now it takes me around 4 hoursThanks man, and how was the install? I’ve seen some videos but idk if I should go for it or pay someone to install for me
If the double x pipe connects to your stock headers, you’ll have to get a reducer or exhaust shop to fab it.Anyone pair these 2Ms to the 3” CORSA double X pipe?
Thanks! I did a search and also could not find a definitive source as the eBay list that they are “HandMade by 2M Fabrication in Pocatello, Idaho”. My box had no paperwork. Maybe someone else had paperwork with info listed.Maybe here? https://www.facebook.com/2Mwelding/
I could not click the link since I'm at work. Also found a 2m in Cortland , Ohio...seems like there are several companies called 2m...oil industry, water industry, farm/agri, and welding (the first I listed).
Mine did not touch but it was close. I know a few brands actually do touch and cause a little vibration when turning. I wouldn’t worry about it being close.Hey guys, I just got my passenger side header on and the steering shaft is only a few millimeters away from the header. Is this normal? How close is it for you guys?