Drag Setup For Street

[CORNYOTE]

Can we fit 10.5" rear wheels on these cars? I am very interested in the Weld Belmont but I want to run 18x10.5 rear with either 295/40/18 or 315/40/18 Nitto 555s. My car is lowered on eibach pro springs. It appears they have one in the gallery on their website, but I can't make out the tire size he used.

These are SVE S350 - 19x10/19x11 wheels with
Toyo R888R - 285/35R19 325/30R19 tires
Lowered on Steeda Progressive springs

Sponsored

 

[djcodeman]

I was planning on running the 5" front like everybody does but use a 215/55/18. They will stretch onto the 5" wheel. I was just curious if anybody on here had done that?

Think you mean bulge, not stretch

 

[NGOT8R]

A 215mm tire is the equivalent to 8.46 inches, therefore, I would agree with decodeman in that it would bulge.

 

[22MAVXLT]

Thanks guys, I used the wrong wording. My bad. I actually went with 18x9 with 255/45/18 in the front and 18x10 295/45/18 in the rear. It looks the way I wanted it to. I may eventually switch over to 18x5 in the front but for now I am happy with what I have.

 

[NGOT8R]

Thanks guys, I used the wrong wording. My bad. I actually went with 18x9 with 255/45/18 in the front and 18x10 295/45/18 in the rear. It looks the way I wanted it to. I may eventually switch over to 18x5 in the front but for now I am happy with what I have.

She’s sittin‘ right now! Silverback Gorilla.

 

[Orange5Fitty]

17x9.5" +43mm Race Star with 305/45 MT Street R.

 

[daSNAK3]

17x9.5" +43mm Race Star with 305/45 MT Street R.

what is your suspension setup?

 

[Orange5Fitty]

what is your suspension setup?

PP1 shocks and struts with Steeda Ultralight Linear Extreme Low Springs. Also running BMR Subframe Alignment Kit and BMR Subframe Lockout.

Sponsored