Door speakers

[TonyT930]

Is there an aftermarket wire harness to attach to the existing oem harness, so I can attach a speaker wire from an aftermarket amp? I'm trying to run a speaker wire from a trunk amp to the door speakers, but use the stock harness from the oem amp to the doors. Thx.

Sponsored

 

[TonyT930]

Is there an aftermarket wire harness to attach to the existing oem harness, so I can attach a speaker wire from an aftermarket amp? I'm trying to run a speaker wire from a trunk amp to the door speakers, but use the stock harness from the oem amp to the doors. Thx.

If not, how are folks getting an aftermarket speaker wire through the rubber grommet from the front kick panels through to the door?

 

[joe603]

When I did my system, I used the PAC harness that provides each speaker lead to an aftermarket amp. Check out the threads in the Infotainment and Electronics section.

 

[MiamiGT350]

I would compare the connectors, but there are quite a few that might work on Amazon: https://www.amazon.com/s?k=ford+oem+speaker+plug

 

[22RoushGT]

When I did my system, I used the PAC harness that provides each speaker lead to an aftermarket amp. Check out the threads in the Infotainment and Electronics section.

Do you recall what PAC box you used? I want to do my system but havent been able to locate the right one

 

[joe603]

Check out my thread...I list all the equipment used with pics.

https://www.mustang6g.com/forums/threads/stereo-build-finally-finished.194495/

Sponsored