Carbon Fiber Decklid/Trunk Recommendations?

[Jeffwels]

Hi all, I am looking to mount a wing on my Gt350 but not interested in drilling into my existing decklid. This leads me to replacement decklids, and I figure why not go Carbon? but after some research it seems the majority of aftermarket parts are VERY hit or miss with quality and support. Namely Anderson which is where I was initially leaning, but the horror stories have turned me away completely.

Does anyone have any recommendations for a carbon fiber decklid that is up to or as close to possible as OEM standard? Anything the seasoned track guys recommend?

Thanks!
Jeff

Sponsored

 

[strengthrehab]

My guess would be Anderson Composites would be the "best".

 

[NightmareMoon]

Or just get a spare OEM decklid - fit is perfect, you can find them used for pretty cheap, and they're aluminum (they're steel) and really not that heavy in the first place.

 

[Jeffwels]

Or just get a spare OEM decklid - fit is perfect, you can find them used for pretty cheap, and they're aluminum and really not that heavy in the first place.

The more i read about the carbon replacements, the more I like this idea.

Thought they were steel though, not aluminum. Either way, looking like this is the only real option for peace of mind if running a larger wing

 

[NightmareMoon]

The more i read about the carbon replacements, the more I like this idea.

Thought they were steel though, not aluminum. Either way, looking like this is the only real option for peace of mind if running a larger wing

No you're right, they're steel.

 

[Plimmer]

I have this one:
https://ajhartmanaero.com/mustang/?sort=featured&page=2

It designed for his wing, which I also have. The whole setup is very light, but if you are looking for OEM fit and finish, then you should just get a second lid as other have selected.

Sponsored