Carbon Fiber Addicts Anonymous Thread

[Reap]

I wish there was a insert for the top on the steering wheel where the aluminum is on the spokes. The sun glares off of it and bothers me more than anything else.

Sponsored

 

[Snakebyte]

I wish there was a insert for the top on the steering wheel where the aluminum is on the spokes. The sun glares off of it and bothers me more than anything else.

I'm not sure if I'm understanding what you are saying correctly, but the link may be to what you are looking for. They are expensive because they are replacement pieces, not overlays. https://forgitec.com/products/steering-wheel-3-piece-trim-replacement-kit

 

[Reap]

I'm not sure if I'm understanding what you are saying correctly, but the link may be to what you are looking for. They are expensive because they are replacement pieces, not overlays. https://forgitec.com/products/steering-wheel-3-piece-trim-replacement-kit

Well, that would take care of the problem of the reflection off of the top of spoke and you are right they are expensive. Thanks, but I guess I'll just have to tolerate the reflection.

 

[16Fastback]

Also added fuse box cover,not installed yet.

 

[Bridgie]

A bit more CF..

 

[GT 550]

@Bridgie is it outside because it won't fit through the doors?

Was drawn to the Z immediately, a long time favourite! Is there a thread on it somewhere?

 

[Bridgie]

@Bridgie is it outside because it won't fit through the doors?

Was drawn to the Z immediately, a long time favourite! Is there a thread on it somewhere?

The Z does get a lot of attention. Unfortunately it is not mine, but a neighbor’s track car. Full race prepped with cage and LS2 engine swap.

 

[2morrow]

Does anyone know if there’s a carbon fiber Navi delete panel that still keeps the HVAC controls?

many one know if there’s one out there w/o the HVAC?

Exploring an idea.

TIA

 

[Skye]

I've placed and order for a CF dual gauge dash insert panel from Trufiber.

I asked about a future radio bezel, without a CD slot. Trufiber replied they have no plans to make such an item.

 

[Jjmoberg]

Has anyone had issues with the Trufiber CF radio bezel? Mine is perfect except the small factory trim piece that has to be re used in the center at the bottom just rattles around. It doesnt snap in at all. I got it to look decent with some velcro, but that seems pretty silly for a $329 part.

 

[DougS550]

Has anyone had issues with the Trufiber CF radio bezel? Mine is perfect except the small factory trim piece that has to be re used in the center at the bottom just rattles around. It doesnt snap in at all. I got it to look decent with some velcro, but that seems pretty silly for a $329 part.

I ask TF also about why they did not make the small rectangle bote cover. They gave no logical reason why they didn't make it. So unless someone else makes one or get someone to do a CF Skinning on it?

 

[Rapid Red]

After-Market covers are not perfect, just a fact.

$329 part, that is because it is a limited production piece. You should read some of the posts about the Anderson CF parts.

Trufiber, purchased 2 parts, a football cover, and hated it mostly cause it still looks like a cover, duh it was a cover LOL Fixed that however, the brake reservoir is a really nice part

Could try some 3m 2-sided to get rid of the rattling.

 

[Jjmoberg]

I ask TF also about why they did not make the small rectangle bote cover. They gave no logical reason why they didn't make it. So unless someone else makes one or get someone to do a CF Skinning on it?

I suppose i could have it skinned or hydro dipped. It doesnt look bad cause its dark down there. But i would rather it matched.

 

[Jjmoberg]

After-Market covers are not perfect, just a fact.

$329 part, that is because it is a limited production piece. You should read some of the posts about the Anderson CF parts.

Trufiber, purchased 2 parts, a football cover, and hated it mostly cause it still looks like a cover, duh it was a cover LOL Fixed that however, the brake reservoir is a really nice part

Could try some 3m 2-sided to get rid of the rattling.

I may try double sided tape if it comes loose with the velcro. It doesnt look terrible. Just not as good as it could of they made that part.

 

[Rapid Red]

Velcro is ok but never really is a tight fit also mushy so to speak.

I think the 3M will work nicely

Sponsored