Bullitt mods

[AnthonyA1234]

Thank you. I'm going to look into them. Not using spacers so I can't help. As you are in FL, may I suggest asking either John or Rod @ Steeda ? They have been quite helpful with my build. Rod is over the install and tuning center in FL. In fact, in the fall, I'm bringing the "Spirit of Skunk Hollow" to FL for the s/c install. As it will take two days, I'll rent a car and drive to the keys. That is the missing link to my 4 corners tour of the US. I will also have the honor of having driven both ends of US 1.

Nice! If you do end up purchasing them this is the tape layout I found you need to use with the bullitt to get the perfect fitment. I stacked 4 on the top 2, 2 on the bottom 2, and 3 on the two side ones.

Sponsored

 

[Elp_jc]

Calling someone a fanboy is rather childish on your part.

Really? The guy who said I was 'denigrating' Borla for saying their pipe has LESS ground clearance than the stock one, which is an absolute fact? I never said it'd drag or anything; just that it had less ground clearance. So the one who needs to 'chill out' is you, but since it's obvious you have no intention of doing that because you have an issue with facts you don't like, I'm ignoring you right after this, so I don't have to read your crap anymore. And I suggest you do the same, for the benefit of the forum.

 

[Elp_jc]

Hey gang, just found this awesome mod on Tony's forum, on a totally unrelated thread (winter tires):

https://imgur.com/gnlx1eb

I asked him for details; hopefully he'll post them soon. That's what I had in mind: Keep 'BULLITT' in the rear, but in a more elegant and subdued way than the current 'dog plate'. Ha ha. If somebody has done something similar, please post it. Maybe the letters could be a tad larger, but they still look better than factory IMO. Not sure yet if I'd change it, but just wanted to share this guy's idea (photo is from his site) with more Bullitt owners .

 

[jwt]

link to the thread? interested in winter tires my self

 

[Elp_jc]

link to the thread? interested in winter tires my self

Here you go: https://www.imboc.com/threads/snow-shoes.372563/#post-3757183 . Nice Bullitt forum .

 

[bsenbay]

I definitely we t with A LOT of mods which I’m sure most of y’all won’t be very amused with.

Here’s the list:

SUSPENSION:
Steeda IRS Subframe Bushing
Steeda IRS Subframe Alignment Kit
Steeda Hood Struts
Steeda Billet Vertical Links
Steeda Heavy Duty Clutch Lime
Steeda Control Arms
Steeda Rear Toe Links
Steeda Ultimate Dual Rate Lowering Springs
Steeda Bumpsteer Kit
Steeda Camber Plates
Steeda G-Track Brace
Steeda IRS Braces
Steeda Sway Bar
Ford Performance Half Shaft Axles

DRIVETRAIN:
QA1 Carbon Fiber Driveshaft
MGW Short Throw Shifter
Tremec Magnum XL Transmission

APPEARANCE:
Anderson Composites Carbon Fiber Spoiler
MP Concepts Full Diffuser Bumper
MP Concepts Rear Window Louvers
Bullitt Windshield Banner
Steve McQueen Signature
Bullitt Tire Stickers

ENGINE:
Bullitt Whipple Competition Supercharger
Cam Sprockets
Oil Pump Gears
Deatschwerks 95lb Fuel Injectors
Palm Beach Dyno Tune w/E85

EXHAUST:
Corsa Catless Long Tube Headers
Corsa Xtreme Cat-Back

 

[Bulutt]

I definitely we t with A LOT of mods which I’m sure most of y’all won’t be very amused with.

Here’s the list:

SUSPENSION:
Steeda IRS Subframe Bushing
Steeda IRS Subframe Alignment Kit
Steeda Hood Struts
Steeda Billet Vertical Links
Steeda Heavy Duty Clutch Lime
Steeda Control Arms
Steeda Rear Toe Links
Steeda Ultimate Dual Rate Lowering Springs
Steeda Bumpsteer Kit
Steeda Camber Plates
Steeda G-Track Brace
Steeda IRS Braces
Steeda Sway Bar
Ford Performance Half Shaft Axles

DRIVETRAIN:
QA1 Carbon Fiber Driveshaft
MGW Short Throw Shifter
Tremec Magnum XL Transmission

APPEARANCE:
Anderson Composites Carbon Fiber Spoiler
MP Concepts Full Diffuser Bumper
MP Concepts Rear Window Louvers
Bullitt Windshield Banner
Steve McQueen Signature
Bullitt Tire Stickers

ENGINE:
Bullitt Whipple Competition Supercharger
Cam Sprockets
Oil Pump Gears
Deatschwerks 95lb Fuel Injectors
Palm Beach Dyno Tune w/E85

EXHAUST:
Corsa Catless Long Tube Headers
Corsa Xtreme Cat-Back

Note sure why you would do all this to a Bullitt rather than a regular GT???

 

[Tacswa]

Last weekend installed MAK FFE, MagnaFlow Resonated X Pipe, Roush Splitter with Canards, Roush Corner Pockets, Roush Rear Spoiler & RTR Hood Extractors

Where did you get your parts? Specifically the splitter and corner pockets

 

[TLW1022]

Where did you get your parts? Specifically the splitter and corner pockets

I ordered the Roush parts from Summit Racing because they showed the quickest delivery
MagnaFlow Resonated X Pipe from CJ Pony Parts, exclusive item to them
RTR Hood Extractors from American Muscle, exclusive to American Muscle

 

[bsenbay]

Note sure why you would do all this to a Bullitt rather than a regular GT???

I got the Bullitt for the same price of a GT PP2. So I got the Bullitt to have something different.

 

[Tacswa]

I ordered the Roush parts from Summit Racing because they showed the quickest delivery
MagnaFlow Resonated X Pipe from CJ Pony Parts, exclusive item to them
RTR Hood Extractors from American Muscle, exclusive to American Muscle

Thanks, I also like the red coyote badge on the grill. I have a red/black color scheme so that give me an idea. Since our bullitts aren't the traditional green mind as well make them our own.

 

[tj@steeda]

Our full parts list for the Steve McQueen Edition is located here -

https://www.steeda.com/steve-mcqueen-edition-bullitt-parts

TJ

 

[Voo Doo]

Our full parts list for the Steve McQueen Edition is located here -

https://www.steeda.com/steve-mcqueen-edition-bullitt-parts

TJ

TJ ...I have most of these mods now. Am installing the G Track cross brace....does the McQueen have the cross brace and the K brace?? Or just the K ? Also finally installing my Steeda adj sway bar end links! I installed your springs, lowered it 3/4”... you said to add 1/2” to the length of my front links to bring it back to a more neutral position.... Correct??? .. the rear is the same as factory...did you do this to the McQueen Edition???

 

[AnthonyA1234]

Has anyone put the rtr grille lights on their bullitt? I really wanna do this to mine.

 

[zack.whitford]

Hi all,

I'm sure this has been covered many times before but what is the general consensus on lowering springs and their potential detriment to the lifespan of stocks shocks? I'm referring particularly to Steeda's products, namely their available Magneride lowering spring offerings (probably the cheaper versions that lower the ride height more).

I honestly couldn't be happier with the way the Bullitt suspension performs out of the box (especially w/ Magneride) but I'd be lying if I said I didn't love the way S550's look when they're lowered slightly, and even with wheel spacers (something I normally wouldn't even consider doing to my own car).

I just unexpectedly came into some Steeda rear sub-frame stiffeners and I got to thinking that maybe I would take the opportunity to do a light once over on the suspension by completing Steeda's hop kit and adding springs and sway bars. My hesitancy stems from how much I enjoy the stock suspension performance and a desire to not mess up the beautiful work that Ford did, but I know that Steeda has a very solid reputation and makes a high quality product.

What would you guys do?

Thanks.

Sponsored