BMR LCA Bearing Install

[Knight5.0]

I ordered my bearing today along with BMR performance springs.


Sent from my iPhone using Tapatalk

Sponsored

 

[evo8904]

May wanna bump that up a little....

6 ton may not cut it.

Just saying.

Damn! Ok, I'm getting a 20 ton like Jmeo.

 

[mustang_guy]

Damn! Ok, I'm getting a 20 ton like Jmeo.

Dont know what kind of deal you found but harbor freight sells a 20 ton for just under 200. If i recall right

 

[evo8904]

Dont know what kind of deal you found but harbor freight sells a 20 ton for just under 200. If i recall right

Yup, that is the one I am looking at. Thanks

 

[Jmeo]

Dont know what kind of deal you found but harbor freight sells a 20 ton for just under 200. If i recall right

That's the one I got and if you go to their website you can get a coupon to get it for $149.00

 

[Rv-Junke]

That's the one I got and if you go to their website you can get a coupon to get it for $149.00

Hi Guys old post, but wondering if a 6 Ton Hydraulic Bench Press is enough. Also, when you all bought the press did you need anything else or just the press? I'm an electrician so this is all new. LOL! ANy help is appreciated.

 

[evo8904]

Hi Guys old post, but wondering if a 6 Ton Hydraulic Bench Press is enough. Also, when you all bought the press did you need anything else or just the press? I'm an electrician so this is all new. LOL! ANy help is appreciated.

6 ton won't be enough. I used a 12 ton

 

[dimitarm]

Guys should i buy both of these parts or i they go to a same place on the car?
http://www.bmrsuspension.com/?page=products&productid=1574&superpro=0

http://www.americanmuscle.com/frpp-knuckle-toe-link-bearing-1516.html

 

[Rv-Junke]

Guys should i buy both of these parts or i they go to a same place on the car?
http://www.bmrsuspension.com/?page=products&productid=1574&superpro=0

http://www.americanmuscle.com/frpp-knuckle-toe-link-bearing-1516.html

Good Question. I have not seen many posts on replacing the OEM Knuckle one...

 

[BMR Tech]

The BK055 replaces the massive rubber bushing on the front mount of the rear lower control arm.

That FRPP piece replaces the bushing on the outer toe link system.

Completely different.

Both should be done for maximized performance.

If you grab the TR005 Toe Links from us, you can take the bearings out of the OEM Toe Links that the TR005s replace...and use them as the FRPP upgrade mentioned above. The OEM Toe Link bearings are the same as the FRPP pieces. ;)

 

[Rv-Junke]

The BK055 replaces the massive rubber bushing on the front mount of the rear lower control arm.

That FRPP piece replaces the bushing on the outer toe link system.

Completely different.

Both should be done for maximized performance.

If you grab the TR005 Toe Links from us, you can take the bearings out of the OEM Toe Links that the TR005s replace...and use them as the FRPP upgrade mentioned above. The OEM Toe Link bearings are the same as the FRPP pieces. ;)

Sneaky Devil you are Kelly!

Sponsored