jperls
Well-Known Member
- Joined
- Nov 22, 2015
- Threads
- 48
- Messages
- 715
- Reaction score
- 285
- Location
- Thousand Oaks
- First Name
- Jason
- Vehicle(s)
- 2015 Magnetic Metallic V6, 1970 mustang convertible
- Thread starter
- #1
Hi everyone,
So I converted to Sync 3 using @HextallS550 harness. However, 10 days after the conversion, my backup camera started acting up. I just had the camera replaced and the wiring harness in the trunk repaired/extended, and this is still giving me grief. I have an automatic transmission, and am suspecting that the problem lies within the pigtail harness that is built into the shifter bezel and shifter mechanism since I still get a good picture from the camera on occasion.
Anyone have the wiring diagram showing how the camera is routed through the car and/or connections that involve the camera? I would greatly appreciate the help.
Thanks
So I converted to Sync 3 using @HextallS550 harness. However, 10 days after the conversion, my backup camera started acting up. I just had the camera replaced and the wiring harness in the trunk repaired/extended, and this is still giving me grief. I have an automatic transmission, and am suspecting that the problem lies within the pigtail harness that is built into the shifter bezel and shifter mechanism since I still get a good picture from the camera on occasion.
Anyone have the wiring diagram showing how the camera is routed through the car and/or connections that involve the camera? I would greatly appreciate the help.
Thanks
Sponsored