ARH Header Long System Installation Experience - 1 guy and 4 jack stands

[Toowired]

Nice write up, but all I could think was "poor bastard having to flat back that!!!" with a hoist and power tools it took me 3 hours to install my SW's

Sponsored

 

[Blk2015GT]

Nice right up, but all I could think was "poor bastard having to flat back that!!!" with a hoist and power tools it took me 3 hours to install my SW's

Yeh, for that amount of time and tools I would just pay someone the $700 or so to install them in a few hours. Love doing things myself but I know when my time is more valuable elsewhere (or just making more than that back)

 

[Jeepwx03]

Yeh, for that amount of time and tools I would just pay someone the $700 or so to install them in a few hours. Love doing things myself but I know when my time is more valuable elsewhere (or just making more than that back)

Half way through I was thinking the same, but I already was to the point of no return. I honestly thought it would have taken me less time. Of course I ran into the issues described.

 

[jayman33]

Good overview on everything. I'm sure you've learned a few things doing this install

 

[Guard5.0]

Nice write up! Sort of like taking one for the team! I think you'll find it's all worth it when you step heavily on the right pedal. It makes a glorious noise!

 

[Cascadia_302]

Congrat's, on your install and a very nice write-up.
Doing your first header job on jack stands is like a "right of passage" step for the do-it-yourself mechanic. Even with the right tools not everyone is cut-out for this level of mod work.
Please post up some vid's of your finished work when you get the time.

 

[fionic]

 

[sicks550]

Did you get a cel? Did the install on my full system a week ago n just got one today haven't checked the code yet

 

[Jeepwx03]

No CEL yet

 

[Farmundeh]

Have either of you gotten a tune yet?

 

[Jeepwx03]

Lund Racing for me. I don't think you can do this install without one

 

[sicks550]

I haven't gotten a tune yet was waiting on my jlt intake

 

[Jeepwx03]

That would explain the CEL

 

[Jeepwx03]

I have to say after a few months, I'm still loving this setup

Sent from my SM-N920V using Tapatalk

 

[IvanCRF]

Did you guys completely remove the AC rubber/metal bracket? I took it out and just want to be sure the provided metal bracket for the top should hold everything tight. Thanks.
[MENTION=10047]Jeepwx03[/MENTION]. Thanks for this thread. It's helping me and so far I've installed the passenger side header.

Sponsored