Any problems with these wheel brands?

[Steve8989]

Foxx, Konig, IPW, Niche ? For 2016 GT/CS 19" all around and my tires are 255/40ZR19 100Y XL Goodyear eagle exhilarate all season

Sponsored

 

[MAGS1]

Not necessarily, however, check to make sure the hub bore matches the Mustang. If it doesn’t, you’ll need hub rings, which aren’t necessarily a big deal but if they crack or fail, the wheel won’t fit snug and could cause some issues. 70.6mm is the S550 fitment. Brands like SVE, Project 6GR, Apex Wheels, Carroll Shelby Wheel Company, etc. make wheels that are specific to the S550 and don’t require hub rings.

 

[MidwayJ]

I've known some people with Niche wheels on their S550s and they were happy with them. Konig seems to be a fairly popular brand on other platforms like Miatas, but I've never known a Mustang owner with them. I have no knowledge of the other two.

In addition to what @MAGS1 said about the hub bore, you would want to make sure the offsets are appropriate.

 

[galaxy]

I had a set of Niche wheels. They're nice. Stylish. Reliable. Just a simple cast wheel. Don't know your budget or reason for these brands, but once you compare these side by side (not to mention weight) to something like Signature, Apex, and some others, well, there's really no comparison.

 

[Steve8989]

I had a set of Niche wheels. They're nice. Stylish. Reliable. Just a simple cast wheel. Don't know your budget or reason for these brands, but once you compare these side by side (not to mention weight) to something like Signature, Apex, and some others, well, there's really no comparison.

Did you have to get spacers or anything for hub bore with them ?

 

[galaxy]

Did you have to get spacers or anything for hub bore with them ?

Didn’t have them on a Mustang. Just commenting on the quality.

 

[MidwayJ]

Did you have to get spacers or anything for hub bore with them ?

I know this guy, and he had Niche Targas on his 2015 GT. They had appropriate offsets (ET40) so he didn't use spacers. As I recall he needed 1.5 mm hub rings because the hub bore was slightly larger than stock.

https://www.mustang6g.com/forums/th...-milan-concave-mesh-by-n4sm.12663/post-601282

 

[NightmareMoon]

Foxx, IPW, and Konig are not brands you usually hear much about on mustangs.

As mentioned, just make sure they're the right offsets, and that they are mustang fit to the hub bore without any rings. There are too many good wheels to choose from which correctly fit our hubs to waste time with wheels which need plastic adapter rings which cause problems.

Try SVE if you want some good mustang fit wheels which are cheap but good quality.

Sponsored