Am I Missing Something (Flat Kit) ?

[WD Pro]

I have the compressor, but that’s it :

Should I have any sealant and what should go in the slot at the top of the T shaped moulding ?

Cheers,

WD

Sponsored

 

[GR11M]

Turn the pump over, there should be canister in the back with the sealant in it.

Like this - I'm actually trying to find out how to replace mine.

 

[jonny10buds]

The slot in the moulding would contain a warning triangle in markets where these are required, eg. Germany amongst others

 

[Entai]

Also check the use by date on the sealant canister/pump.

Mine had less than six months left, when I complained to the dealer they sourced a new one with 4 years on it.

 

[WD Pro]

Thanks all, just to confirm following your responses :

Yes, it’s hiding on the underside thank you

I might see if I can source the triangle

Use by date is January 2025

Cheers,

WD

 

[Kristian87]

Just an fyi - when I tried to use the pump on mine (back on the ecobosst around 2016), I couldn't get a good seal on the valve. May be worth testing it if you can. My GT one may be ok.

When I needed it, luckily I was by a halfords and one of these things worked well;

 

[GR11M]

My first pump didn't even work, the Ford dealer didn't know what to do, so they gave me the one out of the showroom car.

Sponsored