Fitment 275/35/19 on 9.5 square?

[Treefrog]

Probably asked a ton. But can 275/35/19 on a 19x9.5 +35 offset fit? Car id says it will. It's basically the pp1 size rear but square.

Any disadvantage of going square like this?

Sponsored

 

[NightmareMoon]

Probably asked a ton. But can 275/35/19 on a 19x9.5 +35 offset fit? Car id says it will. It's basically the pp1 size rear but square.

Any disadvantage of going square like this?

Would work fine on a 19x9.5 ET 35 as a square setup.... The only thing is 275/25 is a little bit short. Visibly, it looks small in the wheel wells from a side view (lots of fender gap). I ran one set and then moved up to 285/35s, which aren't quite as short. 275/40 may be a better option if its available.

 

[Treefrog]

Yes i see 275/40. Is the pp1 tire size

 

[Brian@BMVK]

Works great. I ran that combination (tire size and wheel size/offset) for a few years and enjoyed it.

 

[FreePenguin]

im sitting on 285/35/19 on 9.5

 

[Treefrog]

I think I probably will go with the stagared pp1 wheel and tire size.

 

[boos550t]

I run 19x9.5 with effective +27.5mm (25mm spacers) squared rear PP1 wheels all around with 275/40/19.

Camber is within factory spec, lowered.

The fronts rub fender liner on bumps that cause the suspension to compress enough.

 

[MidwayJ]

I think I probably will go with the stagared pp1 wheel and tire size.

Why not go with the 275/40 rear PP1 size on all four?

 

[86pagt]

PP1 rears 25mm spacers 275-40s on all 4 corners with BMR minimum drop springs. I like the PP1 wheels so that’s why I didn’t buy aftermarket wheels

 

[Treefrog]

Why not go with the 275/40 rear PP1 size on all four?

I didn't realize that this would fit. Carid won't let me fit that tire up front.

19x9.5. +35mm. With 275/40 will fit? Niche M131 TARGA. All 4 squared?

 

[kluke15]

I run this exact setup on my car. Just got someone’s rear pp wheels and sold him my fronts so I run a squared rear pp setup with a 5 mm spacer in front

 

[Treefrog]

I run this exact setup on my car. Just got someone’s rear pp wheels and sold him my fronts so I run a squared rear pp setup with a 5 mm spacer in front

So you need spacers for them to fit?

I don't know anything about spacers. What would you recommend?

 

[kluke15]

So you need spacers for them to fit?

Depends on the wheels. if you are using rear pp wheels then yes. They would hit the strut I believe without them. But just a 5 mm spacer gives enough room and can still use stock studs

 

[MidwayJ]

I didn't realize that this would fit. Carid won't let me fit that tire up front.

19x9.5. +35mm. With 275/40 will fit? Niche M131 TARGA. All 4 squared?

Yes. I run 275/40 all around on 19x9.5 +33 and the fit is fine.

 

[MidwayJ]

So you need spacers for them to fit?

I don't know anything about spacers. What would you recommend?

You don't need spacers with those +35 offset wheels. He's talking about with PP rear wheels in front.

Sponsored