Sponsored

6R80 & Forced Induction Shifting Issues

RoushCharged

Well-Known Member
Joined
May 8, 2015
Threads
1
Messages
84
Reaction score
22
Location
Redmond, WA
Vehicle(s)
2015 Mustang GT Premium Convertible, Ruby & Loaded
Are you sure this isn't the stability systems pulling power?
 
OP
OP

H35

Well-Known Member
Joined
Mar 31, 2015
Threads
10
Messages
100
Reaction score
52
Location
Ontario, Canada
Vehicle(s)
2015 GT
Could be....
But it also shifts the same way at part throttle with no boost.
 

Sponsored

Nomad

Well-Known Member
Joined
Jan 27, 2015
Threads
4
Messages
119
Reaction score
27
Location
In the garage
Vehicle(s)
2015 GT
Who tuned your car?

When you cruise in D it shifts normally?
TSS tuned it.


I leave it in drive wherever I go. Shifts better than stock.
 

FATHERFORD

Well-Known Member
Joined
Oct 16, 2014
Threads
8
Messages
446
Reaction score
148
Location
Texas
Vehicle(s)
Mustang
Is your car an auto?

Can you send me a video of the car cruising around in 'D'
Please and thank you

Rob
Yes it's a circle D Auto with a Circle D stall.

Still doing tweaks to the car, hopefully get it back here soon. It was cutting out a little over 1000rwhp. Most likely just the plugs.
 
OP
OP

H35

Well-Known Member
Joined
Mar 31, 2015
Threads
10
Messages
100
Reaction score
52
Location
Ontario, Canada
Vehicle(s)
2015 GT
I received an updated tune from Chris @ BBR and hour ago and there is a huge improvement with the shifting issues!!
It's not 100% yet but it's almost there.
 

Sponsored

olaosunt

Well-Known Member
Joined
Jan 10, 2015
Threads
72
Messages
4,291
Reaction score
1,575
Location
Indiana
Vehicle(s)
Guard,base,M6,KB-2.DIB,auto,Hellion TT,2016 GT 350/Gen 3 Whipple ,2018 Mustang GT/Gen 5 Whipple
Ran my auto/hellion car.Gears are 3.55 and tires are balding NT05 R 29 inch tall so less gear than 3.55.
Running base setting boost levels(5-6 psi?) .Car gauge still only reads 1 psi but I confirmed it is definitely making boost.Lol
My 12 trapped the same when it ran 10.8 and made 620 ish.
Does not pull out of the hole hard although I am sure higher stall converter will help( not going to do it as I hated it when it was in my 12 although that has a TVS).
I now see what has been said about the slow shifts.
I would love to turn boost up before my dyno appointment this Friday but now kind of scared of the boost controller.

 

Nomad

Well-Known Member
Joined
Jan 27, 2015
Threads
4
Messages
119
Reaction score
27
Location
In the garage
Vehicle(s)
2015 GT
What turbos are you running? Your mph is decent for wg spring only.
 
OP
OP

H35

Well-Known Member
Joined
Mar 31, 2015
Threads
10
Messages
100
Reaction score
52
Location
Ontario, Canada
Vehicle(s)
2015 GT
Ran my auto/hellion car.Gears are 3.55 and tires are balding NT05 R 29 inch tall so less gear than 3.55.
Running base setting boost levels(5-6 psi?) .Car gauge still only reads 1 psi but I confirmed it is definitely making boost.Lol
My 12 trapped the same when it ran 10.8 and made 620 ish.
Does not pull out of the hole hard although I am sure higher stall converter will help( not going to do it as I hated it when it was in my 12 although that has a TVS).
I now see what has been said about the slow shifts.
I would love to turn boost up before my dyno appointment this Friday but now kind of scared of the boost controller.



Who tuned your car??
 

FATHERFORD

Well-Known Member
Joined
Oct 16, 2014
Threads
8
Messages
446
Reaction score
148
Location
Texas
Vehicle(s)
Mustang
60' and 1/8 mile et don't match the MPH.

I was cutting 2.3 60' and running a 7.4 at 100mph at north star with nearly a 3000' DA with my 62mm TT Car
 

olaosunt

Well-Known Member
Joined
Jan 10, 2015
Threads
72
Messages
4,291
Reaction score
1,575
Location
Indiana
Vehicle(s)
Guard,base,M6,KB-2.DIB,auto,Hellion TT,2016 GT 350/Gen 3 Whipple ,2018 Mustang GT/Gen 5 Whipple
Who tuned your car??
Chris @BBR-this is the only revision I have received after sending first set of WOT logs.

55 mm turbo's.
Sponsored

 
 








Top