3 inch H pipe

[KilluminatiDre]

Anyone know of 3 inch h pipes that are sold seperately and not one of those universal kits that need to be assembled? Trying to replace the h pipe that came with my mbrp race and even emailed mbrp about buying one but they did not respond.

Sponsored

 

[Crewchief5.0]

Steeda sells them.

 

[Scuba]

I have a 3" H-pipe section from an MBRP street kit - I bought an extra directly from MBRP (they don't sell directly anymore is my understanding) to install 18" glasspacks. I don't need the original MBRP H anymore- may be willing to sell/ship. PM me if interested.

 

[KilluminatiDre]

Steeda sells them.

Am i missing it? I dont see any that say 3".

 

[RiotfunK]

Pretty sure the steeda is 3''. It has the step down for the stock exhaust. It works really well. I had one on my car prior to going full exhaust. Id sell it to you but by time you figure in shipping it probs be around cost of new one. Is well made and had nice welds.

 

[robvas]

The Steeda X/H pipes appear to be 2.5"

Do you have headers or stock exhaust manifolds?

Most of the 3" pipes seem to pair with the catback from the same manufacturer (corsa for example)

 

[KilluminatiDre]

The Steeda X/H pipes appear to be 2.5"

Do you have headers or stock exhaust manifolds?

Most of the 3" pipes seem to pair with the catback from the same manufacturer (corsa for example)

Kooks long tube headers with no cats. I had my MBRP H pipe cut and had a Magnaflow 12469 welded into it and thats going to a corsa extreme axle back.

It was too loud and raspy with the H pipe alone and with the magnaflow its not raspy at all but it just has a muffled sound and doesn't sound like a coyote anymore.

I wanted to get another H pipe and have 2 dynomax race bullets welded at the ends right before the corsa axle back. Thinking of getting the knockoff corsa double x and see if the shop can weld the race bullets to the end of that.

 

[tj@steeda]

Steeda is 2.5" to match the factory tubing.

GT350 is 2.5-2.75" in a gradual progression.

Thank you,

TJ

 

[robvas]

I was going to say, Kooks sells the Ultra X, and Lethal sells the Corsa double H, but you're going to pay $600 for a pipe you're just going to cut up at that point

You could try to build your own...

https://speed-engineering.com/produ...ilder-kit-deluxe-304-stainless-ls-engine-swap

 

[SheepDog]

The Corsa Double H comes with fittings for both the OEM choke connection, and can be used for straight through 3" connections

 

[KilluminatiDre]

I was going to say, Kooks sells the Ultra X, and Lethal sells the Corsa double H, but you're going to pay $600 for a pipe you're just going to cut up at that point

You could try to build your own...

https://speed-engineering.com/produ...ilder-kit-deluxe-304-stainless-ls-engine-swap

Yea the knockoff double x is $329 which i can live with having that cut. I kinda wanted another h pipe but based on videos it seems like that double x isnt too bad. I just know i need to put those race bullets on whatever i get on to take the edge off from being catless. It was unbearable over 3500 rpm.

 

[Bullitt_Will]

I got a 3” H PIPE from AWE. I reached out to their customer service, and they were able to accommodate me. It even came out cheaper than most other 2.5” H pipes, I think with shipping I paid $115.

another option would be stainless works. Their site shows that they sell a 3” H pipe.

 

[KilluminatiDre]

I got a 3” H PIPE from AWE. I reached out to their customer service, and they were able to accommodate me. It even came out cheaper than most other 2.5” H pipes, I think with shipping I paid $115.

another option would be stainless works. Their site shows that they sell a 3” H pipe.

Thanks. I will definitely reach out to them. $115 would be great since i will be having part of the rear section cut off and replaced with those race bullets.

 

[RiotfunK]

TY. Steeda for the clarification. The Steeda H pipe and the oem active exhaust was a great combo. I really liked it. Just needed more once I boosted it. I have the stainless works catback with H pipe now. Reach out to Zac at stainless works. He'll get you setup. Their H pipe should work with the MBRP. The SW stuff is really well made

 

[GregO]

I kinda wanted another h pipe but based on videos it seems like that double x isnt too bad. I just know i need to put those race bullets on whatever i get on to take the edge off from being catless. It was unbearable over 3500 rpm.

After buying a 3” X or H pipe, (2) quality resonators and paying for fabrication and welding you’ll be money ahead by purchasing this from Lethal Perf.

Sponsored