DiEzel
GTFO OG - The Professor
My production date was 11-19-14 *:shrug:Waiting for someone with a 15, I'm super tempted on doing it bit don't have time to spend doing all test stuff
Sponsored
My production date was 11-19-14 *:shrug:Waiting for someone with a 15, I'm super tempted on doing it bit don't have time to spend doing all test stuff
Nice, I have a 50th Aniv so wondering if your car have similar options.My production date was 11-19-14 *:shrug:
This is the one you want for an auto WITHOUT adaptive cruise. Do you have Nav?this is for an auto without the adaptive cruise?
I do have the NAV as well.This is the one you want for an auto WITHOUT adaptive cruise. Do you have Nav?
It comes with a a shift light.I will be upgrading as soon as it's possible. Hopefully OEMRadio can do it and even better allow customizations. Like shift light.
So if we don’t want heated, jus buy the bottons and swap em on our pre-2018 wheel I assume?Just a heads up for THOSE DOING THE HEATED STEERING WHEEL along with the cluster. If you're not doing the heated wheel and/or upgrading to a 2018 steering wheel this does not apply.
The 2018 steering wheels have a different air bag as p6cl just discovered. Close but not the same. We are trying to lock down the part number and cost. Why they did this, who knows but the costs will go up for those chasing this portion of the mod.
Just wanted those buying parts or looking to buy parts to be warned. These are the things that come up on first time mod chasing.
Correct.. Still need the SCCM also.So if we don’t want heated, jus buy the bottons and swap em on our pre-2018 wheel I assume?
You can do same build if you have manual trans need to adjust some of the part numbers for automatic but this is easily done by searching the parts on Ford Parts website - Navi will be fineThanks to [MENTION=20657]db252[/MENTION] and [MENTION=32917]p6cl[/MENTION] for pulling the triger. Been rereading this thread all week! I want to order parts and hoping you guys can confirm my order, and steps - I'm a bit of a novice.
Have a GT 2016 Manual trans with sync3 and navi.
1) Order the following:
- JR3Z-10849-LB <-- Cluster for manual trans
- JR3Z-9C888-AA <-- New buttons
- JR3Z-9C888-EA <-- New buttons
- JR3Z-9C888-CA <-- New buttons
- JR3Z-63044D70-BA <-- Instrument Panel
- JR3Z-3F791-HA <-- Steering Column
2) Update Sync 3
3) Then flash 2018 GT as built data and change these lines:
- 720-05-01
- ----D818 001C to C818 000C
- 720-10-01
- ----2000 0000 0058 to 1000 0000 0048
- 720-03-02
- ----D818 001C to C818 000C
I've never used forscan before is there a specific section I need to flash specif to the cluster?
I mean, a San Diegan posted right above you, lol.Can anyone help me out with doing this i have a 2017 Mustang GT Premium performance pack with nav. Do I loose my nav doing this? Any part numbers would be appreciated. And I have never used forscan before. Anyone done this in California?
I mean, a San Diegan posted right above you, lol.
Please read through the thread.. All of the info is here my friend.
I think I might try this in my R... What part of SD are you at?