Is the car on a lift or jack stands? Not sure if your suspension is loaded or not, could be an issue. It shouldn’t really make that much of a difference the way I look at it, but it might be just enough to get the bolt out.
Not sure how accurate the gauge is, I would turn the car on and read across the battery terminals with a voltmeter to see the real voltage. If it is still high, I would suggest the alternator is putting out excessively high voltage. Not sure if you can adjust voltage output or not on these cars...
Update: Didn’t end up taking the wheels off to inspect, but I jacked up the driver’s side of the car and spun both tires. The front tire spun without issue, the rear tire spun fine except it seemed like there was a fairly noticeable difference in how much friction was there when spinning. Don’t...
Was suspecting wheel bearings too. And thank you snellemin for the brake and fluid recommendations. I will check the car this weekend.
As an aside, does anyone know what this is? It’s on the bottom side of the strut brace.
Forgive my ignorance, and I don’t mean this in a negative way, but how would brake fluid cause this issue? My pedal is pretty firm when I use the brakes, so I don’t think there’s air in the system. Are you referring to the fluid possibly getting hot from a previous track day and messing up the...
Based on other things I’ve noticed, it does seem the car was driven pretty hard. I originally thought the front left brake might be the issue, but now I’m suspecting the rear left rotor with your advice. I have no pulsating through the steering, which means it’s probably not one of the front...
Hi all,
Picked up a 2019 Bullitt a few days ago with 36,000 on the dash. Driving the two hours home, I put the car on cruise control. I wanted to slow down and so I depressed the brake pedal, but the cruise control didn’t deactivate. It turns out that the cruise control won’t deactivate until I...
Hey Pony,
It has been a while since I’ve dealt with the issue, but I believe I had a value wrong and that’s what happened. I now have everything working perfectly. I would go back and double check all values. There should be a thread somewhere on this forum with all the values you need. Good luck!
Want to buy left and right 2015-17 OEM exhaust manifolds w/ catalytic converters still installed. Want to go back to stock. Located in Greenwood, SC and willing to pay for shipping.
Hey guys,
I had my AWE exhaust modified with an h pipe resonator back in November. Ever since then, I’ve been dealing with an exhaust rattle (driver side) against the sway bar. I’ve tried just about everything I can think of, from trying to modify the hanger, repositioning the exhaust a million...
I have a black car and when it was wrapped I left the handles, mirrors, roof, wing, and hood vents black. If I wrap it again I’ll probably do the same thing. But you’re right, I don’t think there are many mustangs with black handles, at least in my area.
This might be too much black for you, idk - but I think a black roof and mirrors would look great in addition to all the nice work you have already done.