Search results

3.7 V6 auto here, so my choices were limited because of slightly different lengths. But DSS had what I needed. Balance was terrible but I'm old school and I balanced it myself with the 2 hose clamps. Now it's perfect.

I agree. Alignment dowels will line up the rear subframe Then its just a matter of setting correct toe and camber on the rear.

They're called "SAE battery terminals". Available online.

Hey Less Weight! Looks like it's completely automatic. If I have the correct model (TM291), there are manuals online. https://www.libble.eu/tecmate-optimate-lithium---tm291/online-manual-720079/?page=0003

My street setup (all 4 wheels) Rims: Enkei PF01 18 x 8.5 (35) Tires: Goodyear Eagle F1 Assymetrical 3 255/45 x 18

Look on page 1.

Sorry galaxy, I didn't.

And the problem is? All this is inside a battery box which is shielded from engine heat and vented to cool air. Do you own a Mustang? It's conspicuously absent from your profile.

You are correct. It is too high. I cut out the bottom of the battery box down to the first lower level of the battery box, the exact size of the bottom of the battery, so the battery was captured on the bottom. Then I mounted the battery with large plastic ties. I seached out slightly lower SAE...

Congrats fellow weight freak! 👍😊 My Enkei's were 18.5 lb and I thought that was light.

Just received my Driveshaft shop aluminum one piece replacement driveshaft for 2017 V6 automatic. Just weighed it... 20.1 lbs.

I don't know if your warranty girl will authorize that. After all tires are a wear item. And the rim was damaged because of your worn tires. Ya I know, I'm a wise guy. 😁😳😁

That rim damage WAS NOT done backing off the hoist.

Who knows... all this surging and kicking and bucking may have been a contributing factor to the clutch and transmission failures.

I don't know if anyone mentioned this, but properly installed helicoil threads are stronger than original. Just think of it... aluminum vs steel threds.

Sorry about my late reply. Not enough hours in the day for me. This is a photo of my install of the ATX30-HD. It's a little taller than stock so I sectioned the bottom of the battery box so that the battery is completely captured at the bottom. Then I cut styrofoam pieces for all 4 sides...

That proves that helium weighs the same as air. :)

Just a follow up on my Antigravity ATX-30-HD. I have had zero issues with the battery. I did zero adjustments. Initial erratic charging rates have settled down completely as the system learned the new battery. Install was a bit of a problem as this battery is taller than stock. I sectioned...

I just installed a Antigravity ATX-30-HD battery which weighs 8 lb which means 23.3 lb lighter.

I contacted Chad at Antigravity Batteries. He fixed me up with what I wanted. ATX-30-HD, terminals and a charger are on the way. Thanks for the excellent service Chad! I'm looking forward to my new parts.