Had my car up at a friends place and he looked underneath and noticed something wasn’t right. He told me my driveshaft flex coupling looked bad. I drove all the way home from Lakeland to Port Charlotte thinking about it, not really knowing how bad it actually was. Got it up on my lift and pulled...
Was told by numerous people that my starter is bad.This only been happening on cold starts. I replaced the starter motor and I’m still getting this on cold starts,anybody have any idea what it can be ? Thanks
Need help with code P0217. I recently installed the radium coolant tank along with their radiator cap type-A 1.5 bar.. Since installing it everything’s been fine but I noticed lately the car has been running hotter than normal.. Any help would be appreciated with this,thanks.
Since i’m running breathers i removed the check valve from the passenger side PCV.I heard from someone today that you should not remove the check valve. Any help with this will be appreciated .This cobra jet manifold and e85 is badass up top.
I just replaced my clutch with an Exedy.What is the torque spec for the pressure plate bolts? I’ve been finding different numbers .24 pds and 46pds,thanks.
Started hearing this chattering a few day ago and its been getting very loud..The car shifts fine and the chattering isn’t so loud when pressing down on the clutch pedal..It looks like I’ll be having the transmission dropped, but I’d like to get some help on here first what you think this might...
Started hearing this chattering a few day ago and its been getting very loud..The car shifts fine and the chattering isn’t so loud when pressing down on the clutch pedal..It looks like I’ll be having the transmission dropped, but I’d like to get some help on here first what you think this might...
Installed steeda bump steer kit and ready to go for alignment.Worried about driving there because the alignment looks way off.Is it normal for the alignment to look off after this installation?
Does anyone know what this is behind the fenders?
Had a tough time getting to the 2 bolts behind it to remove fender.The how to videos I watched on the fender removel didn’t have this behind the fenders,it’s looks like some kind of an absorber or vibration eliminator. It could easily be...
Got my Type-GR GT350 fenders and lower grill today.Also got a new oem painted bumper.I have everything Anderson composites makes in carbon fiber for the 2015 GT.I definetly went all out with this build it took me a year to complete.
This has been a common problem for me everytime i wash the car or pull in garage after it’s been raining.The first time this happened the car wouldn’t move when I was in reverse so I when I went hard on the gas I heard a loud bang,thought I busted something for sure.Happened again yesterday...
Looking for recommendations on different tires,I’m a street/daily driver.Firestone screwed up my alignment,I’m way out of spec i have excessive wear from them not adjusting rear toe.I’m running staggered Nitto 555 G2’s 275/35/20 & 305/30/20.Overall I been happy with them,but not in the rain.Thanks.
Had another alignment done 3 months ago and this is what my rear tires look like.My fronts look like new.I’m gonna adjust the oe camber arms myself,because no way will Firestone get in there to do it.I also have the BMR fixed camber arms
that I haven't installed yet, there longer then the oe...
Anybody get really bad NVH from this mount?It Definelty improved my shifts but the NVH was so bad that I think I’m going back to the insert or stay with the oem.Hoping the NVH will improve over time.Boomba says the NVH will lessen after breaking in 1000 to 2000 miles.