Search results

My old tune (gen 3 coyote) was set for a Vortech v3 jt trim with a 3.6 pulley on pump 93. I have a new RPG shortblock with same compression 12-1. I'm now running a 3.3 pulley with octane booster. Would I be safe running the 93 pump tune on my new setup with octane booster, to drive gently to...

I searched and couldn't find anyone that had posted their numbers. I dyno mind next Wed, but I wanted to get an idea of what other people were getting with the 3.3 pulley.

Installing a 3.3 pulley here soon, anyone know what belt size I'll need? It's a 21 Mustang GT 6spd with a Vortech V3 JT-Trim blower.

On the stock motor I put down 762 on a mustang dyno. I have a new RPG Gen3 Level 2 shortblock being installed over the next few weeks. I plan on bumping up the power a bit on the new setup, and as a result I'm wondering what's the max HP I can get out of the V3 JT blower?

I have a Vortech kit on my car. I was going to remove the instake tube off the blower and install a screen. I already have a oil catch can on the passenger side of the motor. And I'm also installing a breather on the driver side. However I ran into a problem and need some help. The...

which do you think is better?

I have a vortech kit with an intake tube attached to the blower with a filter at the end. Is there any significant horsepower to be gained by running a screen or a small filter attached directly to the blower?

I have a vortech v3 kit from Beefcake I was on the Dyno the other day and I keep getting code P0068 when it touches 6k RPM and it goes into limp mode. On the street, I can run it to redline in 1st, 2nd or 3rd gear without any issues. I tried to run it to redline in 4th on the street, and when...

I have expertly highlighted the bunch of cables in RED using state of art technology. But on a serious note, I don't have room behind the IC, and I don't feel like there is enough slack to move it any lower and hide it behind the center part of my bumper. Any thoughts?

This is my first aftermarket boosted car, any other forced induction car I've owned came that way from the factory. So for those who haven't supercharged their car yet, but are thinking about it, here is what I've learned in the first few days of owning one. If I'm wrong on any of this, please...

I have a Vortech system being installed with a maxflow BV57. If you got clips of your BOV, you should post them in this thread.

After your shifter install, did you notice a change in the level of noise coming from the transmission? I have a Barton Hybrid Shifter installed using the transmission mount, and the shop didn't install the foam that came with the shifter. (which I assume is there to help keep the noise down)...

I have a few probably stupid questions. If you have a car tuned fom Nitrous, how does it run at WOT if you don't spray? Does it run really rich if you don't spray? Are you expected to change the tune on the car if you plan on going WOT and not spraying? Just wondering how the car runs if...

Has anyone installed the new Cobra jet intake without installing new motor mounts or aftermarket hood? I saw the video from Steeda, but wasn't sure if anyone had any first hand exp. I tried searching for the subject but had no luck.

In your Mustang, when the fuel gauge reads 0 miles until empty, what's the farthest you've driven?

I have a 2021 GT (purchased new). It has 28k miles, but most of those are highway miles. It reminds me of an old hat I have on while doing yard work. I've tried a wet vac and that didn't do anything. Anyway to fix this? Think a dealer would cover it under warranty?

Installed PMAS intake that requires a tune. Installed the tune. Cranks up just fine, and drives ok. After a few minutes when you go to downshift, it doesn't slow down. Or if you'r in 3rd gear at 35mph and you give it a little gas, and then let off. It speeds up for a second, but then when you...

Car is a gen3 manual. Mods are Wheels & Tires, Longtubes without cats, xpipe and catback, aftermarket air intake using stock airbox + tune. (No idea on RWHP yet, goes on the dyno this Friday to get some baseline numbers before I do one of the next 3 mods) I have about 4k budget on my next...

New Price $400.00 come and get it! 20X9 FORD rims. I have set of 4. Local pickup preferred $400. For all 4.. Never curbed. In great shape.. I'll leave the 285/35 firehawkks on. (Only 2 tires) the 2 tires have 80-90% tread left. Local to Memphis TN. I'll drive a bit and meet someone...

I purchased the car new. 2021 GT, 6spd. (26k miles) catless headers, K&N intake that uses factory airbox. Tune from Shrader Performance. Runs great, sounds awesome. It's alwasys consumed about 1-1.5 qts of oil between oil changes. It made that sound a little on day 1. you can't really hear...