Search results

https://frontstreet.media/2020/01/24/second-chances-the-story-of-terry-eshmans-mustang-obsession/ Killer Pics! Amazing Article!! This board helped get this project underway..... from 525rwhp NA car to what it is now. Thanks 6G!!

Whipple superchargers hanging RoadCone’s wheels in the air at Mod Nationals. We are competing in heavy street at a hefty 3925lbs!

Whipple superchargers hanging RoadCone’s wheels in the air at Mod Nationals. We are competing in heavy street at a hefty 3925lbs!

Instagram, please follow: Road_Cone_5.0 Well it has been a bit for an update. I finally tossed in the towel w the manual. It’s hard hooking all that power w a clutch and I started going through parts. JPC hooked me up with a TH400 and we have been working from there. Even with an auto 2.48...

Selling complete PP brakes and Eradispeed Rotors. Great shape and low miles $1000 OBO

Cortex JRI double adjustable coilovers for all 4 corners. 1/2 price.... $2500

$140.00

DS Loop. $80

I am selling my Gen 3 Whipple. This has the CJ setup, bearings and machined for 150mm throttle body. This will include the 150mm TB, ported lower by BES Racing Engines, fuel rails and fitting, 10 rib system (minus the balancer), air box and I'm sure a few extra items. This has less than 1500...

Well it’s been a bit, but I thought I would give the forum an update. Last November I ran a 9.61@156 with a manual transmission and got asked not to come back. So I started preparing for this year. Cortex Racing in Cincinnati Ohio took on the task of doing a 10pt. legal cage. The process was...

Well its been a bit since I have got to post anything worth while. First of all I would like to recommend a few businesses/people that have helped me out. Whipple has been more than supportive and provided the 150mm upgrade and 3" pulley these pulls were made on. BA Motorsports for helping...

Well after the tune and new setup the cruise is not working in 6th gear. It works in all the other gears. The car has a Tremec magnum xl in it. Is this a tune or transmission... or other issue? Thanks for any assistance.

Repost: was deleted but if you look on cardboard you can see my user name and date Brand new Twin disc clutch $950 shipped! I also have used one with less than 1000 miles if interested. This is a 26 spline and great clutch for a Tremec or 6060 conversion. 850lbs tq rating.

I’m finishing up my new build and should make some steam.... shooting for 1100-1200rwhp. Time for new tires. This will be on a 17x10.5” rim. I’m debating between the two tires, 28” and wonder what will hook better or if there even is a difference. If the hook is the same I will go with a tire...

I have been a member for a bit... and went the 500rwhp NA build route first. Then I upgraded to a Whipple 2.9 Gen 3 and made 930 on a stock block. Weighing in at 4100lbs plus, we made several 145mph passes. After this we decided to teardown the motor to make "all the power". BA Motorsports...

I have the full 3" ARH exhaust system with the 1"7/8 headers and H pipe. I sold the headers and H pipe and just ordered 2" ARH headers and 3" X pipe. Here is my question: After the X pipe the catback, even though listed as a 3" exhaust system, necks down to 2.5. This is pretty far back in...

ARH 1” 7/8 Headers and 3” H Pipe In Excellent condition. $1200

As an update to the FI forum I thought I would let you know what the plans are. I sent my blower back to Whipple. They are porting the blower and machining it to 150mm and I purchased the 150mm Elliptical TB. I hope to see a few hp gains over the 132mm. Looks like PBD sells a 6" CAI that...

132mm Whipple Throttle body... $400. Thanks in advance...

I have tried to search the forums and internet for information, but this seems to be a topic that I can't find a lot of information on. I plan on putting some Manley valves in my heads. Next comes a valve job, about 1K. To upgrade to CNC ported heads and valve job is another 1K. Seems like...