Search results

A) If you're interested in my Roush setup please PM me for price/details. I will include VMP twin 67mm throttle body, 79, 75, and 69mm pullies. All you will need is tune/fuel injectors. B) Does anyone know what it would take to make 1000rwhp with Whipple setup? C) I should keep Lund tune...

Ive never driven a car with nitrous before. I currently have id1000 injectors. After this motor build om doing ill be about 850rwhp on e85. If i add a wet nitrous kit will i need bigger fuel injectors? Is it safe to spray a wet kit on tvs intake? Any chance with the heat of it catching on...

Can anyone tell me which bolts (And where to buy) to hook my motor to my engine hoist leveler? I am thinking I can use the bolt holes where the 2 top transmission bolts attach to the motor for the rear, and maybe the top front 2 bolt holes in the front of the motor? I'm hoping to have the...

Specifically I'm looking for where you mounted your fuel pressure gauge, as well as where you mounted your fuel filter keeping it accessible. Also trying to see where agood place to mount the power distribution panel which turns on the 2nd and 3rd pump under boost. How often do you have to...

Can you guys share pics of where you mounted your nitrous bottle?

Hi there. I'm building my 2015 GT Vert to be a deep 9 second monster that I can also take and autoX with and drop the top cruise the beach with the family. That said I am not a mechanic. Just a confident wrencher. As I take car apart/put it back together I'll document here so if you need to...

I went to track tonight. Granted it was 90 degrees out but was able to get some good practice runs in. I ran pretty consisten 11.5x with 1.9 to 2.2 60 ft on slicks. I have a Roush Supercharger for what its worth. I tried all kinds of different things. no matter what I tried I kept blowing the...

Im at the track on hoosier slicks and skinnies. When i try to do a bur out, its saying line lock not available. I cant figure out why. Im in track mode advance track off it goes through init then says line lock not available.

Can anyone educate me on nitrous? I'm going to shoot for 1000rwhp. Thinking of adding a dry kit. Are there certain brands to go with vs brands to stay away from? Avg cost to fill a 15 lb bottle? Will i need different tunes for e85 with and without nitrous? Please help me with...

Does anyone know the stock flow rates of the heads on the '15+? Has anyone had their heads ported and seen any real world gains? Has anyone ported the TVS head unit and seen gains? Debating whether I should have the head unit/heads ported in the new build I'm doing.

Can you guys point me to an article or explain what this is and how blocking oil flow is beneficial?

I want to shoot for 1000rwhp. People say that isn't possible with the 2.3 tvs. After I build the motor with mahle pistons Manley rods, fore triple pump fuel system, running e85 should I be able to spray a little nitrous to get there? Trying come up with a game plan.

Does anyone know where to get the cross brace at? Which shifter is recommended for 6060? (Cheaper the better) Dss best driveshaft for about 950rwhp? That's what I'm going to shoot for. Lastly, I'm not wrong going with 6060 vs. Magnum setup right? Any pros/cons of one vs the other?

Does anyone know where to get the cross brace at? Which shifter is recommended for 6060? (Cheaper the better) Dss best driveshaft for about 950rwhp? That's what I'm going to shoot for. Lastly, I'm not wrong going with 6060 vs. Magnum setup right? Any pros/cons of one vs the other?

What are you using for the power for the 15 plus cars? Ive heard of the magnum, is everyone paying 5000 for the trans with drive shaft? Are you guys stocking with mt82? Please advise

I like driving a manual. What is the easiest transmission to replace the mt82 with for cost that will mostly bolt right in that will handle 1000rwhp?

If you're doing any work to your mustang check out chilton online manual. It's pretty awesome. Shows black and white picture with the bolts you need to focus on in color torque specs etc. Can't beat for 26 bucks a year!

I ordered an engine hoise, and engine stand. Will this fit our engine to be able to lift it with the hoist? http://www.amazon.com/Proform-67457-Engine-Lift-Plate/dp/B001CMRUJY?ie=UTF8&keywords=engine%20lift%20plate&qid=1465421611&ref_=sr_1_3&sr=8-3

Does anyone know where I can get a crank turning sprocket for when I do my OPG/Crank sprocket?

Hi there, Are there any good write-ups out there on how to pull our motor in your garage? I imagine I will pull my bumper off, pull the support beam out, get a cherry picker, bolt up the motor pull straight out the front? I know its a bit involved, and I could figure a lot of it out, but if...