***Urgent*** Check Clutch Line At Brake Master Cylinder

[wingnutt]

Btw, can a late engagement point of the stock clutch can be an indication that it's simply worn?

heck yea!

Sponsored

 

[RedStallion27]

I was about to say "let's see how much they're gonna charge for a piece of rubber hose and 2 clips" expecting way more than the $10 you're asking ... well done!

$10 would be nice. It’s up to $40 now. I know it’s been a few years but still.

https://www.steeda.com/steeda-555-7035-s550-clutch-hose

 

[John S]

....unbelievable what some places will charge for a piece of hose. Here's what Pegasus charges. Tilton offer's theirs in gray and your local NAPA store probably has the same American sourced name-brand hose even cheaper?


Remote Brake Fluid Reservoir Hose, 5/16 inch ID (Standard)

This hose is specially made to be compatible with brake fluid. It fits our Remote Brake Fluid Reservoirs With Push-on Fittings (Part Nos. 3565 and 3566) as well as the Tilton Remote Reservoir Mounting Bracket (Part No. 3557). It is a direct replacement for the hose supplied with Tilton Universal Master Cylinder Kits.

Note: Do not be tempted to use rubber fuel hose! Typical rubber fuel hose is not compatible with automotive brake fluid. Our hose is formulated to withstand brake fluid and will not dry out, crack, and leak like standard fuel hose will. This hose is only available with a red outer covering, to distinguish it from fuel hose.

ID: 5/16" (0.3125" / 7.9mm)
OD: 0.53" (13.5mm)
Maximum operating pressure rating: 200 psi / 13.8 Bar
Operating temperature range: -40°F to +200°F (-40°C to +93°C)
Vacuum rating: 30 in-Hg
Minimum bend radius: 3"
Weight: 0.09 lb / ft

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty	Part No.	Desc.	Price	Stock Status
	3575-FOOT Condition: New SKU: 29492	Remote Brake Fluid Reservoir Hose, 5/16 inch ID, per foot	$2.49	In Stock

 

[m3incorp]

What length is needed?

....unbelievable what some places will charge for a piece of hose. Here's what Pegasus charges. Tilton offer's theirs in gray and your local NAPA store probably has the same American sourced name-brand hose even cheaper?


Remote Brake Fluid Reservoir Hose, 5/16 inch ID (Standard)

This hose is specially made to be compatible with brake fluid. It fits our Remote Brake Fluid Reservoirs With Push-on Fittings (Part Nos. 3565 and 3566) as well as the Tilton Remote Reservoir Mounting Bracket (Part No. 3557). It is a direct replacement for the hose supplied with Tilton Universal Master Cylinder Kits.

Note: Do not be tempted to use rubber fuel hose! Typical rubber fuel hose is not compatible with automotive brake fluid. Our hose is formulated to withstand brake fluid and will not dry out, crack, and leak like standard fuel hose will. This hose is only available with a red outer covering, to distinguish it from fuel hose.

ID: 5/16" (0.3125" / 7.9mm)
OD: 0.53" (13.5mm)
Maximum operating pressure rating: 200 psi / 13.8 Bar
Operating temperature range: -40°F to +200°F (-40°C to +93°C)
Vacuum rating: 30 in-Hg
Minimum bend radius: 3"
Weight: 0.09 lb / ft

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty	Part No.	Desc.	Price	Stock Status
	3575-FOOT Condition: New SKU: 29492	Remote Brake Fluid Reservoir Hose, 5/16 inch ID, per foot	$2.49	In Stock

 

[John S]

About 10"

 

[m3incorp]

Thanks, I will order one.

Sponsored