Cobra Jet Intake Installed

[Sinister]

First of all, big thanks to RBS550 for doing it first and answering all my questions. Just picked it up today from my buddy's shop. Installed a Cobra Jet intake, UPR adjustable motor mounts, FRPP 65mm twin throttle body, FRPP CAI, FRPP 47# injectors (going to E85), ARH 1 7/8" long tubes, high flow cats, Hpipe, tied into the stock exhaust piping in the rear with Magnaflow mufflers, and an MGW Race Spec shifter. Tuning is by Lund with an nGauge. With the initial tune it fired right up and runs pretty good. Just need to datalog it next week and get a few spots smoothed out. After the 93oct tune is dialed in I'll swap to E85. Next up will be a custom set of cams and I'll shoot for that 500+whp number. Anyways, here's a couple of pics.

Sponsored

 

[ero 5.0]

Ive seen a couple cj and boss setups just tickle the 470 rwhp number. Not sure if cams will get the extra 30, but that would be nice. Cant wait to see some threads and numbers when people start putting cams in. Looks Good!

 

[Kahboom]

With the custom set of cams I have no doubt that he'll hit more than 500+. Great looking set up by the way.

 

[krahooligan]

awesome. thanks to you guys for doing what no one else has. im saving for a boss intake manifold or cobra jet myself! gonna be pretty sweet once i get it.
could you post up a video of a cold start, rev, 0-60 or whatever, and a video of noise in the cabin?

 

[Dramad1]

Car and install looks super clean, congrats... you must be stoked!

 

[craigsix]

Ive seen a couple cj and boss setups just tickle the 470 rwhp number. Not sure if cams will get the extra 30, but that would be nice. Cant wait to see some threads and numbers when people start putting cams in. Looks Good!

a guy from lsxkilers had a 2013 with cj intake and cams was putting down more than 520 whp at the kc fbody mustang meet. another guy with boss intake and stock cams was over 480.

 

[Sinister]

Ive seen a couple cj and boss setups just tickle the 470 rwhp number. Not sure if cams will get the extra 30, but that would be nice. Cant wait to see some threads and numbers when people start putting cams in. Looks Good!

With the custom set of cams I have no doubt that he'll hit more than 500+. Great looking set up by the way.

a guy from lsxkilers had a 2013 with cj intake and cams was putting down more than 520 whp at the kc fbody mustang meet. another guy with boss intake and stock cams was over 480.

Thanks guys. I'm hoping for around 460-470 now (with e85) and I'm fairly sure a good set of cams with good tuning will see the 500 mark. I can't wait to take it to the track and see how it does there. Need a driveshaft and half shafts to really push it hard though.

awesome. thanks to you guys for doing what no one else has. im saving for a boss intake manifold or cobra jet myself! gonna be pretty sweet once i get it.
could you post up a video of a cold start, rev, 0-60 or whatever, and a video of noise in the cabin?

Thanks. I'll get some video of it this weekend some time. The cats and hpipe make it have zero drone or rasp. It's pretty quiet inside the car at cruising speeds, and has a deep throaty growl at WOT. It sounds perfect IMO.

Car and install looks super clean, congrats... you must be stoked!

Thanks! Yeah everything is tucked away nicely. Looks like it came from Ford this way. Yes I'm very stoked!

 

[RBS550]

AWESOME!! That's SWEET & MEAN!! I'm happy for you and thanks for mentioning me, I'm glad to be of any help possible.

 

[D.Brown]

Looks fantastic. I hope you get to that 500whp mark!

 

[rozay]

I thought cj and boss intake wasn't really good with these new coyote motor. Power by the hour did a test with it. Am I missing something here. I'm seeing more and more intake mani. Popping up. Maybe it's time to get one also? Sorry to jack the thread a little.

 

[Chameleon]

Awesome mods Sinister!

 

[Sinister]

AWESOME!! That's SWEET & MEAN!! I'm happy for you and thanks for mentioning me, I'm glad to be of any help possible.

No problem and thanks!

Looks fantastic. I hope you get to that 500whp mark!

Thanks! Me too

I thought cj and boss intake wasn't really good with these new coyote motor. Power by the hour did a test with it. Am I missing something here. I'm seeing more and more intake mani. Popping up. Maybe it's time to get one also? Sorry to jack the thread a little.

If tuned properly and with supporting mods they make great top end power, especially on E85.

Awesome mods Sinister!

Thanks!

 

[pinero61]

500 rwhp and some better gearing from a T6060 would make this thing a rocket.

 

[rozay]

Damn you forum guys. Now I have to have an intake mani.

 

[Pablo GT350]

In for dyno results.

Sponsored