Help Running Lead Off Battery Terminal (Positive)

[Tyler2386]

I'm planning to connect a Ctek batter tender up to my battery, but I noticed that we don't have a secondary post on our factory positive terminal to hook accessories to. Where are you guys attaching to? Are you changing the connector or is there some way to run a wire from the positive post as it sits?

I figured some of you guys with aftermarket audio systems have had to figure this out already.

Sponsored

 

[SlateStang92]

Sub'd

Sent from my SM-N915V using Tapatalk

 

[NotMarc]

I'm planning to connect a Ctek batter tender up to my battery, but I noticed that we don't have a secondary post on our factory positive terminal to hook accessories to. Where are you guys attaching to? Are you changing the connector or is there some way to run a wire from the positive post as it sits?

I figured some of you guys with aftermarket audio systems have had to figure this out already.

Anybody? I'd like to know to wire in an amp as well

 

[B.Crowder]

I put the ring connector under the the bolt used to tighten and loosen the main battery cable at the terminal.

 

[NotMarc]

I put the ring connector under the the bolt used to tighten and loosen the main battery cable at the terminal.

Okay. and did you run through the grommet on the passenger side people have been using?

Thanks

 

[B.Crowder]

Yes. I had to remove the right front wheel and liner and went through the passenger side.

Sponsored