Just ordered WORK's Emotion CR 2P from RavSpec

[DarkSubRosa]

Looks good! I am very excited

Thanks. The big deep lip like in the original pictures I posted won't be happen because of the offsets but based on math, I should be able to get pretty close to a 3" lip out back and a bit less upfront.

You aren't doing some Vossen VPS are you? They were on my short list and Brian was great answering my 75 questions


There is another thread that had pricing. You can search for RavSpec in here. He is a new vendor that just joined here on Wednesday.

Short answer on pricing is the following.

20" wheels start around 2800-3200 and it goes from there. 19's are around 2500-2600 and up.

I think the price point is amazing for the quality and it being a 2 piece wheel with tons of offset possibilities.

I have been working with Brian ;)

Sponsored

 

[Todd15Fastback]

I have been working with Brian ;)

Awesome! He is great to deal with. I went back and forth on the VPS as they are amazing wheels and look phenomenal!

Can't wait to see what you end up with:cheers:

 

[Need4SpeedMotors]

The VPS is an amazing wheel def would love having a set on my own ride but im going to hold off for my next build which will def require some sexy forged wheels.

Todd for the Works did you hammer out the offsets? since its a lipped I was thinking maybe something like a 27/51 ?

 

[Todd15Fastback]

The VPS is an amazing wheel def would love having a set on my own ride but im going to hold off for my next build which will def require some sexy forged wheels.

Todd for the Works did you hammer out the offsets? since its a lipped I was thinking maybe something like a 27/51 ?

Paul - we are still working on the offsets. I still have to get the brake/wheel spec info that I pinged you on, along with David @ Steeda.

I think the rears can be +45 or close to that based on the offsets for 20x11's that I have seen so far, their tire sizes and ride height

The front is likely to fall around what you posted above, +25 - +30. I really trying to get something where the lip is a bit deeper in the rear, even if only .5".


I just don't have enough understanding of offsets, ride height, tires sizes etc, but you can best bet I am learning. I had a long call with Marc at RavSpec yesterday afternoon and he really helped me get a much better grip on this stuff.

I am going to do all of my due diligence on this even if it takes me another 2 weeks to vet these offsets as I can't risk something being off.

 

[Todd15Fastback]

Update - I have worked with Mark @ RavSpec and the staff at WORK sending over very specific brake information for the 6 piston brembo information.

I wanted to give a big THANKS to Anthony@HTM for getting all that caliper information for me. I did not have the right tools to accomplish and he did this out of the goodness of his heart! Thank you Anthony!!

We are going with the following wheels and offsets:

20x10 +38 'A' disk which is the super deep concave disk along with a 5mm hub centric spacer for the center caps to clear. Lip will be 2.4" in the front.

20x11 +45 'A' disk which is the super deep concave disk. Lip will be 2.6" in the rear.

 

[kkakonn]

Awesome! I love it when people mix the JDM look into domestic cars. I just ordered a set of TE37 ultras myself.

 

[VTECSAUCE]

Awesome! I love it when people mix the JDM look into domestic cars. I just ordered a set of TE37 ultras myself.

Those are badass wheels. Finding the right wheels for this car is tough, too many choices. I'm going to wait it out awhile and see what I like as more people change theirs up.

 

[dubster99]

I've had TE's, Mugen MF8's, and 2 sets of works on import cars. Was thinking about doing the same on this, but big wheels from those MFR's are expensive.....

 

[Todd15Fastback]

Awesome! I love it when people mix the JDM look into domestic cars. I just ordered a set of TE37 ultras myself.

This company is all new to me but I love their design and quality as I am stickler for those things when buying nice wheels that cost a decent penny.

The TE37's are going to look awesome. Can't wait to see your setup.

Those are badass wheels. Finding the right wheels for this car is tough, too many choices. I'm going to wait it out awhile and see what I like as more people change theirs up.

It literally took me 8 months to finally settle on these. I knew it as soon as the vendor RavSpec posted the pictures of the WORK Emotion CR2P.

I literally flipped between 8 sets of wheels. I have never had this issue in trying to pick out a set of wheels for any vehicle I have ever owned. I guess it is just this car and its style:shrug::frusty::headbonk:

 

[kkakonn]

This company is all new to me but I love their design and quality as I am stickler for those things when buying nice wheels that cost a decent penny.

The TE37's are going to look awesome. Can't wait to see your setup.

It literally took me 8 months to finally settle on these. I knew it as soon as the vendor RavSpec posted the pictures of the WORK Emotion CR2P.

I literally flipped between 8 sets of wheels. I have never had this issue in trying to pick out a set of wheels for any vehicle I have ever owned. I guess it is just this car and its style:shrug::frusty::headbonk:

You'll love them, Work has been very well known in the Japanese domestic market for making some of the highest quality wheels. Ive had them on every car I've owned in the past. Be sure to share those photos with us when you get em!

 

[Todd15Fastback]

You'll love them, Work has been very well known in the Japanese domestic market for making some of the highest quality wheels. Ive had them on every car I've owned in the past. Be sure to share those photos with us when you get em!

I will for sure. I am having a professional photographer take the pictures:cheers:

 

[Tommy V]

I will for sure. I am having a professional photographer take the pictures:cheers:

Dammm Todd those are some sweet wheels,what was the pricing if u dont mind me asking?

 

[Todd15Fastback]

Dammm Todd those are some sweet wheels,what was the pricing if u dont mind me asking?

Thanks, Tommy:cheers:. They are around $3200 for the wheels. Not including lugs or center caps.

 

[Khyber]

Thanks, Tommy:cheers:. They are around $3200 for the wheels. Not including lugs or center caps.

and no tires? :eyebulge:

 

[Terminated]

So... you're not going to be ordering the GT350 reps then?
Haha, awesome looking wheel man!

Sponsored