Just ordered WORK's Emotion CR 2P from RavSpec

[Need4SpeedMotors]

Went with the best out there good choice !

Sponsored

 

[Diode Dynamics]

Those are going to look so good! One of our dealers has those on their 2014 SEMA Build:

BTRCC:

Can't wait to see those on your Mustang

Nick C.

 

[GetYourWheels]

Conrats & great choice, cant wait to see these installed!

 

[Todd15Fastback]

I would think offsets are the same for 19 or 20. Guess it depends on offset. I asked about 9.5 +35 & 11 +55

I am working with RavSpec and WORK to ensure we get the offset right. I don't want to have a wheel with the wrong offset since things are not cheap.

You will love them. Work makes an amazing wheel.

Welcome to the Japanese wheel club! We are an elite group in the S550 community, LOL.

And the RS3's... AWESOME TIRES!!!! I had some of those on Enkei RPF1s on my Mazda3, and holy shit did they have some grip.

I have been very impressed with all the research I have done on their build quality, customer service, etc. These wheels are just beautiful and are perfect for my wheel tastes.

Great to hear some good feedback on the RS-3's. Makes me feel better about my choice and paying for a high-end tire.

You made the right choice. Congrats Todd

:cheers:

Nice! Those should be pretty light too.

Yep. I should save about 6-7lbs per wheel. Even 1-2 lbs per tire vs. the Pirelli's

ohhh I like those as well.. GT Silver in 19x9 and 19x10 both with as much concave/lip as possible please! But I wouldn't want more lip in the front than the rear and id want the tires to be flush with the fenders/quarters. Cant find any prices for them on the website.

I am going after flush fitment as well, both front and rear. I also want a narrow step lip up front and a wider one out back like all dish setups look like.

Here is a thread where base pricing has been shared.

http://www.mustang6g.com/forums/showthread.php?t=22181

Went with the best out there good choice !

Thanks, Paul!

Those are going to look so good! One of our dealers has those on their 2014 SEMA Build:

BTRCC:

Can't wait to see those on your Mustang

Nick C.

Thanks, Nick! They are a good looking wheel and I am certainly anxious. Just have to get the offset #'s correct. That is the obstacle ATM

Conrats & great choice, cant wait to see these installed!

Thanks buddy!

 

[2Cool]

Beautiful rim, but did they verify that they would fit the PP brakes with that dish?

 

[Todd15Fastback]

Beautiful rim, but did they verify that they would fit the PP brakes with that dish?

They have. They have the specs/offsets already dialed in for the non GT PP 4 piston calipers. Mine is the first car with the GT PP brakes, so I owe them wheel alignment/brake specs for the PP brakes.

I would assume the offset with the 4 pot would be applicable to the 6 pot as the calipers are close to the same size. I think the 4 pot is just a bit wider?

 

[Todd15Fastback]

Here is their wheel spec for the CR 2P and the offset ranges.

 

[Todd15Fastback]

Here is a side profile of what the rear wheel will look like. Exact setup, anodized polished lip, GT Silver face, deep concave, minus the red, flat center cap.

I bet the step lip is pretty close to the size of what mine will be as well.

I think this will look sweet on the Ingot GT PP

 

[Amaury]

My car has been riding on Work wheels for some years. Love them and I'm sure you will too!!

Protege
http://www.iputinwork.com/?cat=3&paged=12

 

[DarkSubRosa]

These are going to look awesome. I considered some Works but wanted a monoblock and wasn't sure on the offsets. Glad to hear they are working that out with you! I have some wheels coming but it'll be a bit. I don't want to let the cat out of the bag yet as to what I'm doing.

 

[jpaul]

wondering what these wheels would set me back at $$

 

[Todd15Fastback]

My car has been riding on Work wheels for some years. Love them and I'm sure you will too!!

Protege
http://www.iputinwork.com/?cat=3&paged=12

Looks good! I am very excited

These are going to look awesome. I considered some Works but wanted a monoblock and wasn't sure on the offsets. Glad to hear they are working that out with you! I have some wheels coming but it'll be a bit. I don't want to let the cat out of the bag yet as to what I'm doing.

Thanks. The big deep lip like in the original pictures I posted won't be happen because of the offsets but based on math, I should be able to get pretty close to a 3" lip out back and a bit less upfront.

You aren't doing some Vossen VPS are you? They were on my short list and Brian was great answering my 75 questions

wondering what these wheels would set me back at $$

There is another thread that had pricing. You can search for RavSpec in here. He is a new vendor that just joined here on Wednesday.

Short answer on pricing is the following.

20" wheels start around 2800-3200 and it goes from there. 19's are around 2500-2600 and up.

I think the price point is amazing for the quality and it being a 2 piece wheel with tons of offset possibilities.

 

[NewSchool]

It's about time you made up your mind! You just sat back and waited for all of us to try all the wheels out... Then you go in a totally different direction. Haha J/k Todd. These are going to look amazing. I can't wait to see this setup! Congrats Brother!

 

[Todd15Fastback]

It's about time you made up your mind! You just sat back and waited for all of us to try all the wheels out... Then you go in a totally different direction. Haha J/k Todd. These are going to look amazing. I can't wait to see this setup! Congrats Brother!

LMAO!! I know. I feel like a wheel whore:lol:.

I think I need about 8 S550's so I can have a different wheel that I like on each car.

Thanks for the compliment:cheers:

 

[VTECSAUCE]

One of my favorite wheel manufacturers out there alongside Volk

Sponsored