What did you do to your Mach 1 today

[Mach 307]

I bought one!

Traded my GT for a FJG 7,100 miler.

BTW, I have a set of the Y spokes alloys that are going on, the 5 spokes are in mint condition with excellent tyre tread so will be going up for sale soon (in the UK).

CONGRATS PHIL!

Sponsored

 

[The Spider House]

CONGRATS PHIL!

Thanks Alec. Got the Y spokes on now. So much better looking wheels IMO.

 

[Gen 6 Mach1]

I bought one!

Traded my GT for a FJG 7,100 miler.

BTW, I have a set of the Y spokes alloys that are going on, the 5 spokes are in mint condition with excellent tyre tread so will be going up for sale soon (in the UK).

Great looking Mach !! Congratulations, post up pictures when you get your other wheels on .

 

[The Spider House]

Great looking Mach !! Congratulations, post up pictures when you get your other wheels on .

Office car park before spotted I was using spaces I shouldn't ha ha

 

[Gen 6 Mach1]

Office car park before spotted I was using spaces I shouldn't ha ha

Wheels look Fabulous and our Cars are Awesome looking , my Car gets to hang out in the Man Cave , while I watch a movie , TV , listen to Music or Detail Her. Enjoy..

 

[The Spider House]

Wheels look Fabulous and our Cars are Awesome looking , my Car gets to hang out in the Man Cave , while I watch a movie , TV , listen to Music or Detail Her. Enjoy..

Thank you. Sounds like your baby is living the dream

 

[Mikepol2]

Installed a JLT coolant tank cover. That back hose clamp is a bitch to get on, I ended up using needle nose vice grips to get it into the slot in the back of the cover. Didn't like the cover hiding the max fill line so I spade drilled a 1-1/8" sight hole in the side. Very tight against the oil separator. But I like the way it looks, saw one at Ford Nationals and was like yep, there's the next mod.

 

[JFALK68]

Installed a JLT coolant tank cover. That back hose clamp is a bitch to get on, I ended up using needle nose vice grips to get it into the slot in the back of the cover. Didn't like the cover hiding the max fill line so I spade drilled a 1-1/8" sight hole in the side. Very tight against the oil separator. But I like the way it looks, saw one at Ford Nationals and was like yep, there's the next mod.

I had the exact same issue that clamp is a real bitch. Had to use the same tools. I was almost going to cut the back hole straight down thru the bottom so the cover could just slide over top of the hose. Not sure if there is a special tool for that clamp.

 

[Mikepol2]

I had the exact same issue that clamp is a real bitch. Had to use the same tools. I was almost going to cut the back hole straight down thru the bottom so the cover could just slide over top of the hose. Not sure if there is a special tool for that clamp.

that is a great idea cutting that slot straight down. If I ever take it off, definitely doing that.

 

[JFALK68]

that is a great idea cutting that slot straight down. If I ever take it off, definitely doing that.

Thanks. I didn’t think to drill a hole so you can see the max fill line on the tank. That’s a good idea.

 

[Gen 6 Mach1]

I got the same cover guys , and I did the cut so the back hose didn't half to come off , I figured looking at it , what a pain . Great Idea Mike sight hole .
I volunteered at the shop today , afternoon shift . A couple old Fords pre and post war II . F35s from the Air Force base fly by , they split there time around the valley, they fly by a few days a week . When they get real low , very impressive.....

 

[The Spider House]

I got the same cover guys , and I did the cut so the back hose didn't half to come off , I figured looking at it , what a pain . Great Idea Mike sight hole .
I volunteered at the shop today , afternoon shift . A couple old Fords pre and post war II . F35s from the Air Force base fly by , they split there time around the valley, they fly by a few days a week . When they get real low , very impressive.....

Is the windshield washer cap 3D printed? Do it yourself or is there soneone who does them? Looks smart, me like.

 

[MACHtobers Very Own]

Took a quick day trip for lunch and a beer in Richmond .

 

[Gen 6 Mach1]

Is the windshield washer cap 3D printed? Do it yourself or is there soneone who does them? Looks smart, me like.

Here's a screenshot of his eBay site , I didn't see anymore but maybe he makes them . Good luck.

 

[SBR70.3]

I finally got around to installing the Steeda Competition FSB/RSB and Dual Rate Magneride Springs.

Tip if you decide to do this: do the FSB while the passenger side strut assembly is out. Makes the job 1000000% easier.....like I never had to drop an F bomb and had the stock out and the new one in in about 30 minutes.

Next track day for this car isn't until end of July, so plenty of time to test it on the streets.

Sponsored