Anyone Able To Identify This Badge?

[steve_2020]

Started a thread a while back about possibly replacing the large pony emblem on the back, and going with a round emblem with the tri-bar pony on it. Lots of those out there on eBay, Etsy, etc. However, I saw this photo and the round badge is distinctly different than what I’ve seen.

Anybody know what model these were on?

I don’t hate the look of these below, but feel like less chrome (like the one above) might jive better with my car.

Sponsored

 

[PoCoBob]

It's a 2.3L HPP car.

 

[Farkel]

2020 Ecoboost High Performance Package.

https://www.drivingline.com/article...ance-package-finally-a-legitimate-muscle-car/

 

[steve_2020]

2020 Ecoboost High Performance Package.

https://www.drivingline.com/article...ance-package-finally-a-legitimate-muscle-car/

wonder if you can find these by themselves?

 

[Farkel]

wonder if you can find these by themselves?

Check with Benny @LevittownFordParts.

 

[MAGS1]

Might be one of those pieces where you need an HPP VIN to order one. Probably need the whole panel. Cool panel/emblem for sure.

 

[Farkel]

Keep in mind that a replacement emblem might require a complete new decklid panel w/ emblem, depending on whether the emblem has locating pins or enough flat surface to use mounting tape.

 

[S550HPP]

Definitely HPP... CS may also have. Can probably find the back panel at a recycler.

 

[Mustangpursuit]

Check with Benny @LevittownFordParts.

I almost got that one, its available but must get entire decklid, but I felt the Pony Package decklid version was more modern for my liking and rarer so I got that one instead also from Levittown
and works great matching with my front GT/CS grill

 

[BlkMach10510]

Maybe this:
https://parts.levittownfordparts.co...remium--2-3l-l4-gas/body--exterior-trim-trunk

 

[greasy]

You can easily recreate that badge and have it custom made and adjust color, remove chrome, etc…through Yoast Fabrication.

https://www.yofab.com/?srsltid=AfmBOooyUBNQv_SAHddhN-IoT3GYux_wJ4v815pL4YE3Dbo-U48G0OSz

 

[Bikeman315]

Found one.

'

https://www.ebay.com/itm/3062145514...S8m7BJRr0ZvzbFyjgruEb8Mqo9xfn5E8aAnqsEALw_wcB

 

[The Spider House]

Found one.

'

https://www.ebay.com/itm/3062145514...S8m7BJRr0ZvzbFyjgruEb8Mqo9xfn5E8aAnqsEALw_wcB

Does it have the locating studs across the top? Should be 6 I think for post 18 S550s
Hard to tell from the photo but you may struggle with grip without them.

 

[Bikeman315]

Does it have the locating studs across the top? Should be 6 I think for post 18 S550s
Hard to tell from the photo but you may struggle with grip without them.

No idea. Best to contact the seller directly.

 

[LevittownFordParts]

Confirmed this decklid panel and emblem assembly is as follows
https://parts.levittownfordparts.com/oem-parts/ford-emblem-lr3z6342528aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=

Thanks,
- Benny

Sponsored