ihasnostang
Well-Known Member
- Joined
- Sep 28, 2018
- Threads
- 25
- Messages
- 475
- Reaction score
- 238
- Location
- MN
- Website
- www.youtube.com
- Vehicle(s)
- Saturn ion, 2019 201A, EB PP1, Ruby Red
- Thread starter
- #1
I'm looking at adding a IR brake temp sensor which will be datalogged with an Arduino during track use and overlaid onto track footage. Here is the 800C sensor , which is 0-5V. i have been exploring places to mount it that put it within 50mm of rotor. I printed out the sensor and the sight cone that is 20mm diameter at 50mm away. Currently the easiest place seems to be mounting to the dust shields with a Z bracket as shown. There should be enough room in the cavity area of the dust shield to put hardware. I modeled my bracket to 2mm thickness, and the closest sizes on sendcutsend are 1.9mm, 2.6, 3, 3.6.
Looking for feedback as i am a bit concerned about vibration/ resonant frequencies. I recently installed the ducted belly pan and have the vorsclag deflections on the way as i have a track day at road america coming up.
Looking for feedback as i am a bit concerned about vibration/ resonant frequencies. I recently installed the ducted belly pan and have the vorsclag deflections on the way as i have a track day at road america coming up.
Sponsored