What did you do to your S550 Mustang today?!

[decableguy2000]

Made it back home unscathed from Mustang Week.

Sponsored

 

[CR151S]

Chased some new friends through AZ backroads.

 

[Jpump]

Installed a Revesol carbon fiber steering wheel I bought from the market section.

 

[GTP]

Installed oil temp gauge.

 

[GTP]

In prep for my next HPDE event (this Saturday at Eagles Canyon Raceway) I installed the Schroth QuickFit harness on the passenger side. I’m Intermediate Solo certified and so I got away with only having the harness on the driver’s side for quite a while, but occasionally I’ll get an instructor assigned for a couple of sessions and would sometimes get a “you know you’re supposed to have the same level of protection for the passenger as you do for the driver” from an instructor.

Yeah some instructors are chill, while others want to find something to admonish you for.

Most of them are wearing chest hybrid Hans anyway so why should they care?

I didn't care for the last old fart that insisted I remove my form fitting snap-in floor mats. That do not move and have our feet on them as well.

 

[CR151S]

got a couple more from yesterdays cruise.

 

[GT_MTL]

Waiting for new rotors/pads, painted the caliper in red with G2 kit :-)
(as my new rear calipers are natively red as well...)

 

[vaeevictiss]

Not quite today, but over the course of the weekend...

 

[Jpump]

Installed an eBay PP2 splitter(Cuztom Tuning.) Couldn't justify spending $500+ on the OEM one.

 

[PeterParker]

Added a bit more to my CF interior:

 

[HoosierDaddy]

Bought it a new garage buddy. Comes home tomorrow but here are some right off the transport covered with dust pre-wash pics.

I think they will get along if the newby doesn't flaunt his 3.1 second 0-60.

Update: Adding some at home pics. Its a miracle any of these have what I intended in frame. Brutal Arizona sun meant I could NOT see anything on the phone screen accept whatever was reflecting. Still not washed; supposed to rain tonight. May have to periodically scuff up the brake pedal to match the gas electric pedal. Never touched the brake pedal on the 12 mile drive home. Thought I was done with Perellis P Zeros forever but was not to be. But they will be gone soon and probably the wheels with them. Want something bright and 19" instead of these 20s.

Front caliper:

Rear caliper

 

[fmc_smt]

Bought it a new garage buddy. Comes home tomorrow but here are some right off the transport covered with dust pre-wash pics.

I think they will get along if the newby doesn't flaunt his 3.1 second 0-60.

Wow you bought a new phone !!

 

[985nola]

Installed an eBay PP2 splitter(Cuztom Tuning.) Couldn't justify spending $500+ on the OEM one.

That splitter looks great, the "texture" matches stock and appears to be one piece. I really like it. Could you share the link, I can't find it on eBay. Thanks!

 

[Farkel]

Bought it a new garage buddy. Comes home tomorrow but here are some right off the transport covered with dust pre-wash pics.

I think they will get along if the newby doesn't flaunt his 3.1 second 0-60.

Your sig says "When in doubt, yes I am probably joking." I can only hope this post is an example of that.
To each his own, but since this is a Mustang forum I feel obligated to point out that that's an EV . It's a Tesla - isn't that Elon Musk's company? . And what's with that front end? Did the stylists quit in frustration before they got to design that part?
Good luck with it, and I hope you have good life insurance, so your beneficiaries will be provided for when it bursts into flames and/or takes off on its own and runs you into a bridge abutment.

 

[Jpump]

That splitter looks great, the "texture" matches stock and appears to be one piece. I really like it. Could you share the link, I can't find it on eBay. Thanks!

Sure, here's the link. It is one piece and it's held on with self taping screws. I added some double sided tape just incase.

https://www.ebay.com/itm/192691348377

Sponsored