What did you do to your S550 Mustang today?!

[The Demon]

This guy must be real confused.

Sponsored

 

[_zOmbIE_]

This guy must be real confused.

Those rear tires are skinny enough that I think the badge is right and the body is wrong.

 

[NFG19]

Those rear tires are skinny enough that I think the badge is right and the body is wrong.

They are that skinny so he can actually do burnouts lol

 

[decableguy2000]

Went on a 100 mile ride to break in some new shoes on The Blue Ridge Parkway and some isolated backed roads.

 

[Stage_3]

Decon'ed using Griot's Synthetic Clay and followed it up with their 3-in-1 ceramic wax.

Looks amazing man. Like a mirror.

 

[rxryanm]

This is how she sat last night

And all the way to just a few minutes ago

Unsure what happened, but I noticed my driver fender liner rubbing last night on the interstate, wore a hole through it, and my grille being loose at the bottom and the splitter front and center being cracked and separating from the bumper where it meets under the fog/turns. Driver’s side belly pan is obviously down a bit, so looks like some hardware has gone missing as well. So I guess I’ll put it on stands tomorrow and troubleshoot further.

 

[kiksbutt]

This is how she sat last night

And all the way to just a few minutes ago

Unsure what happened, but I noticed my driver fender liner rubbing last night on the interstate, wore a hole through it, and my grille being loose at the bottom and the splitter front and center being cracked and separating from the bumper where it meets under the fog/turns. Driver’s side belly pan is obviously down a bit, so looks like some hardware has gone missing as well. So I guess I’ll put it on stands tomorrow and troubleshoot further.

Whoever wrapped it, might've taken off the bumper and other parts to get it on there? Just a theory

 

[rxryanm]

Whoever wrapped it, might've taken off the bumper and other parts to get it on there? Just a theory

I appreciate the theory - already checked that route out and was not the culprit. I hope it’s just replace hardware/splitter and I’m good to go.

 

[JohnnyGT]

Both sides were rubbing the fender liner and frame at full lock: SVE R325s 19X10 ET+40 with 285/35/19 Nitto G2 tires.

@shogun32 to the rescue again. Threw on 8mm worth of spacers tonight and it seems to have done the trick. Looks better too.

A little poke, but may go to 10mm for a touch more.

I also got a last bit of air out of the lines and pedal feels normal again. Went on a fun drive after to try out the bigger brakes.

 

[ice445]

Both sides were rubbing the fender liner and frame at full lock: SVE R325s 19X10 ET+40 with 285/35/19 Nitto G2 tires.

@shogun32 to the rescue again. Threw on 8mm worth of spacers tonight and it seems to have done the trick. Looks better too.

A little poke, but may go to 10mm for a touch more.

I also got a last bit of air out of the lines and pedal feels normal again. Went on a fun drive after to try out the bigger brakes.

It's that +40ET that's getting you, my +35 doesn't rub. With that said 8mm is plenty to avoid any issues.

 

[Modulom4]

Those rear tires are skinny enough that I think the badge is right and the body is wrong.

that's the cheaper version with Hamster power

 

[Cobra Jet]

This is how she sat last night

And all the way to just a few minutes ago

Unsure what happened, but I noticed my driver fender liner rubbing last night on the interstate, wore a hole through it, and my grille being loose at the bottom and the splitter front and center being cracked and separating from the bumper where it meets under the fog/turns. Driver’s side belly pan is obviously down a bit, so looks like some hardware has gone missing as well. So I guess I’ll put it on stands tomorrow and troubleshoot further.

Possibly from when they were wrapping the front cover they had to remove the pan?

 

[ArgentumS550]

Cut the green wire for center channel and adjusted sound and fade. Haven't tested enough to tell, but I have high hopes for better sound from what I've read.

 

[rxryanm]

Possibly from when they were wrapping the front cover they had to remove the pan?

Unfortunately not - only took off the taillights and vents on the hood. The lower grille had been loose from the bottom for a bit, so I think all the wind movement and things not being tightened up probably just finally took its toll on the parts.

 

[Gnatsum21]

Changed welcome screen to something else.

Sponsored